AutoTecknic Hazard Warning + Central Locking Button Repair Kit - BMW F10 5 Series/M5 / F06/F12/F13 6 Series/M6 / F01/F02 7 Series / F25 X3

Regular price $24.95

Black Friday price: $19.96 (applied in cart)

SKU: ATK-PR-0075

Add To Wishlist

Every time you lock the doors or hit the hazards, your finger lands on the same two buttons in the middle of the dash. On the F10 5 Series, F06/F12/F13 6 Series, F01/F02 7 Series, F25 X3, M5 and M6, those buttons sit in plain view in the center stack, and years of rings, keys and fingernails show. The finish scratches, the symbols wear down, and the most visible switch in the cabin ends up looking the oldest.

The AutoTecknic BMW Hazard Button Repair Kit replaces the scratched hazard warning and central locking buttons on your factory switch (BMW part 61319161896). You keep the original switch, wiring and function. You just get clean, sharp buttons back.

Fix the Buttons, Keep the Switch

The switch itself rarely fails. What wears out is the two button caps you touch every day: the hazard button on top and the lock button below it. Buying a complete new switch assembly gets you the same caps that will wear the same way. This kit replaces only the parts that are actually worn, so you restore the center stack for a fraction of the cost of a full switch.

Built to Match the Factory Look

Each button is molded from ABS plastic and finished with a clear coat, so it matches the surrounding trim and holds up to daily use. The hazard triangle and lock symbols are laser etched, so the backlighting in your original switch shines through at night exactly as it did when the car was new.

Will This BMW Hazard Button Repair Kit Fit My Car?

If your car has the hazard and central locking switch with BMW part number 61319161896, this kit fits. That switch is used across the F-chassis 5, 6 and 7 Series, the F25 X3, the F10 M5 and the F06/F12/F13 M6, including both pre-LCI and LCI cars. No cutting, no trimming and no modifications.

What's Included

  • Hazard warning button (1)
  • Central locking button (1)

Key Features

  • Replaces scratched or worn buttons on BMW switch 61319161896
  • ABS construction with a clear coat finish to match the factory trim
  • Laser-etched symbols let your original switch backlighting shine through at night
  • Reuses your factory switch, wiring and connector
  • Fits pre-LCI and LCI models, including the M5 and M6
  • Designed and produced by AutoTecknic

Vehicle Fitment

Fits the following BMW models with the hazard warning and central locking switch, part 61319161896:

  • BMW 5 Series F10 Sedan (2011-2016): 528i, 535i, 535d, 550i, ActiveHybrid 5, including xDrive
  • BMW M5 F10 (2012-2016): M5, M5 Competition Package
  • BMW 5 Series F07 Gran Turismo (2010-2017): 535i GT, 550i GT, including xDrive
  • BMW 6 Series F06 Gran Coupe (2013-2019): 640i, 650i, including xDrive
  • BMW 6 Series F12 Convertible (2012-2018): 640i, 650i, including xDrive
  • BMW 6 Series F13 Coupe (2012-2017): 640i, 650i, including xDrive
  • BMW M6 F06 Gran Coupe (2014-2019)
  • BMW M6 F12 Convertible / F13 Coupe (2012-2018)
  • BMW 7 Series F01/F02 (2009-2015): 740i, 740Li, 750i, 750Li, 760Li, Alpina B7, including xDrive
  • BMW ActiveHybrid 7 F04 (2011-2012)
  • BMW X3 F25 (2011-2017): sDrive28i, xDrive28i, xDrive35i, xDrive28d

Also fits the F11 5 Series Touring and the F03 7 Series High Security.

Installation Notes

This is a do-it-yourself job, and the new buttons pop onto your existing switch body, so there's no wiring to touch. You'll need a plastic trim tool. Don't use a metal screwdriver, because it will mar the surrounding trim.

  1. Turn off the ignition and make sure the hazards are off.
  2. Use a plastic trim tool to carefully release the hazard and central locking switch from the center stack trim, working evenly around the edges.
  3. Unplug the connector from the back of the switch and move the switch to a clean work surface.
  4. Pop the worn hazard button and lock button off the switch body.
  5. Press the new buttons into place, hazard on top and lock below, until each one seats fully.
  6. Plug the connector back in, test the hazards, central locking and backlighting, then press the switch back into the trim.