FC Titanium Stud Conversion Kit - BMW M14 80mm

Regular price $595.00

Black Friday price: $565.25 (applied in cart)

SKU: FC-M14STUD-TI

Add To Wishlist

Lug bolts make every wheel change a juggling act, and steel studs add weight right where you least want it. Future Classic titanium wheel studs solve both. The wheel slides onto the studs, the nuts go on in seconds, and you take rotating mass off every corner of the car.

This is the BMW version of the kit, for F and G chassis cars with M14x1.25 hubs.

Check Your Lug Nuts Before You Order

These studs thread into your M14x1.25 hub, but the outer thread is M14x1.5. Standard M14x1.25 lug nuts will not fit. You need M14x1.5 lug nuts with a 19mm hex. Lug nuts are not listed as part of this kit, so plan for a set if you do not already own them.

Why Titanium Wheel Studs

Titanium has the best strength to weight ratio of any metal, and it does not corrode. That is why exotic carmakers use titanium wheel fasteners. Future Classic developed this kit with Rogue Engineering. Its tensile strength beats factory steel lug bolt ratings, and each 80mm titanium stud weighs 60% less than a 75mm steel stud, per Future Classic. That weight comes off the spinning mass at every corner.

The bullet nose tip guides the nut on straight, so it will not cross-thread. The 80mm body is long enough to run up to a 15mm wheel spacer.

What's Included

  • Future Classic M14 80mm titanium wheel studs
  • Loctite 262 (red) threadlocker
  • Laser-cut foam insert and Future Classic E30 M3 Tic Tac livery box

Key Features

  • Titanium studs, 10.9 grade
  • 60% lighter per stud than a 75mm steel stud (Future Classic figure)
  • Threads into M14x1.25 hubs, takes M14x1.5 lug nuts with a 19mm hex
  • 80mm body works with wheel spacers up to 15mm
  • Bullet nose tip prevents cross-threading
  • Made in the USA

Vehicle Fitment

The Future Classic M14 Titanium Stud Conversion Kit fits these BMW models:

  • BMW 2 Series F22 / F23 (2014-2021)
  • BMW 3 Series F30 / F31 (2012-2019)
  • BMW 4 Series F32 / F33 (2014-2020)
  • BMW 4 Series Gran Coupe F36 (2015-2020)
  • BMW 5 Series F10 (2011-2016)
  • BMW 5 Series G60 (2024-2026)
  • BMW 8 Series G14 / G15 (2019-2025)
  • BMW 8 Series Gran Coupe G16 (2020-2025)
  • BMW M2 F87 (2016-2021)
  • BMW M2 G87 (2023-2027)
  • BMW M3 F80 (2015-2018)
  • BMW M3 G80 (2021-2027)
  • BMW M4 F82 / F83 (2015-2020)
  • BMW M4 G82 / G83 (2021-2027)
  • BMW M5 F10 (2013-2016)
  • BMW M5 F90 (2018-2023)
  • BMW M6 F12 / F13 (2012-2018)
  • BMW M6 Gran Coupe F06 (2014-2019)
  • BMW M8 F91 / F92 (2020-2025)
  • BMW M8 Gran Coupe F93 (2020-2025)

Driving a GR Supra? Use the A90 Supra titanium stud kit. Not sure your car is a match? Send us your VIN and we will confirm.

Installation Notes

A home mechanic can do this with basic tools in an afternoon. Take your time on the threadlocker step. It is what keeps the studs in the hub. This item is non-returnable.

  1. Lift the car, support it on jack stands, and remove the wheels.
  2. Clean the hub threads so the Loctite can grip.
  3. Apply Loctite 262 to the hub end of each stud.
  4. Thread the studs into the hub using a double nut method, and never use a wrench on the stud body itself.
  5. Let the Loctite cure for the time on its label before you mount the wheels.
  6. Mount the wheels with M14x1.5 lug nuts and torque to spec. Re-check torque after the first 50 to 100 miles.