FC Wheel Spacer Kit - BMW 5x120 12mm Lug

Regular price $189.00

Black Friday price: $179.55 (applied in cart)

SKU: FC-BWSK-M12-005

Add To Wishlist

E-chassis BMWs came out of the factory with conservative wheel fitment. Set a modern tire on an E46 or E9X and the gap to the fender is hard to miss. Future Classic BMW 5x120 wheel spacers push the wheels out where they belong, so your car looks as planted as it drives.

This is the complete kit for 12mm lug cars. Two hubcentric spacers machined from 6061-T6 aluminum, a full set of extended M12x1.5 lug bolts, hub bolts and anti-seize all come in one box. Pick your thickness, bolt them on, and drive.

Why Future Classic 5x120 Wheel Spacers

Future Classic developed and tested these spacers with Fall-Line Motorsports in real track conditions. They are hubcentric, so the hub carries the load and the wheel stays centered, just like a wheel mounted without a spacer. Lug-centric spacers leave the wheel hanging on the bolts, which is where most vibration complaints start. Each spacer also bolts to the hub with its own hub bolts, so it stays put when you pull a wheel at the track.

Worried about the bolts? You do not need to source anything. The kit includes ten extended lug bolts for the spacer you pick, so your factory bolts go back in the trunk.

What's Included

  • 2 Future Classic 5x120 wheel spacers (one axle)
  • 10 extended zinc plated M12x1.5 lug bolts
  • 4 hub bolts to secure the spacers to the hub
  • Copaslip copper anti-seize with applicator brush
  • Future Classic livery box with the Frank Stella 3.0 CSL art car print
  • Optional: FC M12x1.5 wheel hanger pin set (+$24.95)

Key Features

  • Complete bolt-on kit for BMW 5x120 cars with 12mm lug bolts
  • Hubcentric design keeps the wheel centered and vibration free
  • CNC machined from 6061-T6 aluminum
  • Black anodized finish for corrosion and wear resistance
  • Secures to the hub with its own hub bolts for track and competition use
  • Pocketed design keeps weight down
  • Developed and track tested with Fall-Line Motorsports
  • Available in 5mm, 10mm, 12mm, 15mm and 18mm

Vehicle Fitment

The Future Classic BMW 5x120 Wheel Spacer Kit (12mm Lug) fits these BMW models:

  • BMW 1 Series E82 / E88 (2008-2013)
  • BMW 1M E82 (2011)
  • BMW 3 Series E36 (1992-1999)
  • BMW 3 Series E46 (1999-2006)
  • BMW 3 Series E90 / E91 (2006-2012)
  • BMW 3 Series E92 / E93 (2007-2013)
  • BMW 5 Series E34 (1989-1995)
  • BMW 5 Series E60 / E61 (2004-2010)
  • BMW 6 Series E63 / E64 (2004-2010)
  • BMW M3 E30 (1988-1991)
  • BMW M3 E36 (1995-1999)
  • BMW M3 E46 (2001-2006)
  • BMW M3 E90 / E92 / E93 (2008-2013)
  • BMW M5 E60 (2006-2010)
  • BMW M6 E63 / E64 (2006-2010)
  • BMW Z3 / Z3 M E36/7 (1996-2002)
  • BMW Z4 / Z4 M E85 / E86 (2003-2008)
  • BMW Z4 E89 (2009-2016)
  • BMW Z8 E52 (2000-2003)

Driving an F chassis car with 14mm bolts? Get the 14mm lug kit. On studs? Get the No Lug Bolts version. Not sure which kit fits? Send us your VIN and we will confirm.

Installation Notes

If you can swap a wheel, you can install these. Plan on about an hour per axle with basic hand tools and a torque wrench. This item is non-returnable, so confirm your spacer size before you order.

  1. Lift the car, support it on jack stands, and remove the wheels.
  2. Clean the hub face so the spacer sits flat with no rust or debris behind it.
  3. Apply a thin coat of the included Copaslip to the hub face and bolt threads.
  4. Secure the spacer to the hub with the included hub bolts.
  5. Mount the wheel with the included extended lug bolts and torque to the factory spec in a star pattern.
  6. Re-check lug bolt torque after the first 50 to 100 miles, and after every track session.