SAVE $4.99
AutoTecknic Hazard Warning + Central Locking Button Repair Kit - BMW F10 5 Series/M5 / F06/F12/F13 6 Series/M6 / F01/F02 7 Series / F25 X3
Black Friday price: $19.96 (applied in cart)
Every time you lock the doors or hit the hazards, your finger lands on the same two buttons in the middle of the dash. On the F10 5 Series, F06/F12/F13 6 Series, F01/F02 7 Series, F25 X3, M5 and M6, those buttons sit in plain view in the center stack, and years of rings, keys and fingernails show. The finish scratches, the symbols wear down, and the most visible switch in the cabin ends up looking the oldest.
The AutoTecknic BMW Hazard Button Repair Kit replaces the scratched hazard warning and central locking buttons on your factory switch (BMW part 61319161896). You keep the original switch, wiring and function. You just get clean, sharp buttons back.
Fix the Buttons, Keep the Switch
The switch itself rarely fails. What wears out is the two button caps you touch every day: the hazard button on top and the lock button below it. Buying a complete new switch assembly gets you the same caps that will wear the same way. This kit replaces only the parts that are actually worn, so you restore the center stack for a fraction of the cost of a full switch.
Built to Match the Factory Look
Each button is molded from ABS plastic and finished with a clear coat, so it matches the surrounding trim and holds up to daily use. The hazard triangle and lock symbols are laser etched, so the backlighting in your original switch shines through at night exactly as it did when the car was new.
Will This BMW Hazard Button Repair Kit Fit My Car?
If your car has the hazard and central locking switch with BMW part number 61319161896, this kit fits. That switch is used across the F-chassis 5, 6 and 7 Series, the F25 X3, the F10 M5 and the F06/F12/F13 M6, including both pre-LCI and LCI cars. No cutting, no trimming and no modifications.
What's Included
Key Features
Vehicle Fitment
Fits the following BMW models with the hazard warning and central locking switch, part 61319161896:
Also fits the F11 5 Series Touring and the F03 7 Series High Security.
Installation Notes
This is a do-it-yourself job, and the new buttons pop onto your existing switch body, so there's no wiring to touch. You'll need a plastic trim tool. Don't use a metal screwdriver, because it will mar the surrounding trim.
Vehicle Application: F10 M5 (2012-2016)
Every time you lock the doors or hit the hazards, your finger lands on the same two buttons in the middle of the dash. On the F10 5 Series, F06/F12/F13 6 Series, F01/F02 7 Series, F25 X3, M5 and M6, those buttons sit in plain view in the center stack, and years of rings, keys and fingernails show. The finish scratches, the symbols wear down, and the most visible switch in the cabin ends up looking the oldest.
The AutoTecknic BMW Hazard Button Repair Kit replaces the scratched hazard warning and central locking buttons on your factory switch (BMW part 61319161896). You keep the original switch, wiring and function. You just get clean, sharp buttons back.
Fix the Buttons, Keep the Switch
The switch itself rarely fails. What wears out is the two button caps you touch every day: the hazard button on top and the lock button below it. Buying a complete new switch assembly gets you the same caps that will wear the same way. This kit replaces only the parts that are actually worn, so you restore the center stack for a fraction of the cost of a full switch.
Built to Match the Factory Look
Each button is molded from ABS plastic and finished with a clear coat, so it matches the surrounding trim and holds up to daily use. The hazard triangle and lock symbols are laser etched, so the backlighting in your original switch shines through at night exactly as it did when the car was new.
Will This BMW Hazard Button Repair Kit Fit My Car?
If your car has the hazard and central locking switch with BMW part number 61319161896, this kit fits. That switch is used across the F-chassis 5, 6 and 7 Series, the F25 X3, the F10 M5 and the F06/F12/F13 M6, including both pre-LCI and LCI cars. No cutting, no trimming and no modifications.
What's Included
Key Features
Vehicle Fitment
Fits the following BMW models with the hazard warning and central locking switch, part 61319161896:
Also fits the F11 5 Series Touring and the F03 7 Series High Security.
Installation Notes
This is a do-it-yourself job, and the new buttons pop onto your existing switch body, so there's no wiring to touch. You'll need a plastic trim tool. Don't use a metal screwdriver, because it will mar the surrounding trim.
Driven by performance and precision, AutoTecknic has been crafting premium carbon fiber and aerodynamic upgrades since 2000. From our Southern California headquarters, we design and engineer parts that elevate both form and function. Built for drivers who demand more from their machines