KW Coilover Kit V1 - Audi A4 S4 B8 8K (2009-2016) Sedan FWD + Quattro, No EDC
The B8 A4 and S4 landed on a platform that Audi finally got right. Stiffer, more precise, and better to drive than the B7 in almost every measurable way. But the factory ride height still leaves too much air between the tire and the arch, and if your B8 does not have Electronic Damping Control, you have one fewer reason to hesitate on the KW V1.
Without EDC, the V1 drops right in. No bypass modules, no conflict with adaptive damper logic, and no compromises to the KW engineering. The dampers are valved for the B8 chassis specifically, matched to the spring rates from the start. You get a cleaner stance, better handling response, and the same corrosion-free stainless construction that KW builds into every kit they sell.
Key Features
- Stainless steel outer sleeves for permanent rust resistance
- Height-adjustable lowering, 10-30mm typical range for B8 platform
- Matched spring and damper system tuned for non-EDC B8 chassis
- Low-friction polyamide guide bearing for smooth front strut operation
- Retains factory ride quality without requiring adaptive damper electronics
- TUV-certified for street use
- Compatible with Sedan FWD and Quattro drivetrains
Vehicle Fitment
Direct OEM replacement fitment for:
- Audi A4 / S4 B8 8K (2009-2016): Sedan, FWD and Quattro, without Electronic Damping Control
Installation Notes
Professional installation recommended. Alignment required after installation. This kit is not compatible with B8 models equipped with Electronic Damping Control.
- Set desired ride height before final torque to allow fine-tuning without removing the kit
- Alignment required immediately after installation
- Allow 500-mile break-in period for dampers to reach optimal performance