The second-generation R8 is a legitimate supercar with a suspension system built to match. You want to close the gap between the car and the road. You don't want to compromise the engineering that makes it work at speed.
KW H.A.S. gives you that control. These height adjustable lowering springs use your factory dampers as designed, so you get a proper reduction in ride height without disturbing the shock calibration the R8 was engineered around. The adjustable spring perch lets you find the exact target height at install, not after the fact.
Key Features
- Height adjustable lowering springs, works with factory dampers
- Adjustable spring perch, dial in exact ride height within range
- Lowering range: 5-20mm from stock ride height
- TUV-certified, German engineering and quality validation
- Progressive spring rate, appropriate for the R8 platform
- Direct OEM fitment, no modification required
Vehicle Fitment
Fits the following Audi vehicles with factory shock absorbers:
- Audi R8 / Chassis 4S (2016)
Installation Notes
Works with OEM shock absorbers. No damper replacement required. Alignment required after installation. Do not use with aftermarket or worn dampers.
- Verify OEM dampers are in good condition before installation. The R8 platform is sensitive to damper condition.
- Set desired ride height at assembly before final torque
- Alignment required immediately after installation