KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines
KW H.A.S. Audi R8 42 ; all models; all engines

KW H.A.S. Height Adjustable Lowering Springs - Audi R8 (42) (2007-2015) All Models, All Engines

$1,864.95
SKU: KWS253100AN

Minus Plus

The first-generation R8 is still one of the finest driver's cars ever built. Years in, and you're finally ready to close that wheel gap with a spring upgrade that doesn't require pulling the factory dampers.

KW H.A.S. is built for this. The adjustable spring perch lets you set your exact target height at install, across every engine variant and body configuration the 42-chassis R8 came in. Your factory shocks stay exactly where they are. No extra cost, no compatibility concerns.

Key Features

  • Height adjustable lowering springs, works with factory dampers
  • Adjustable spring perch, dial in exact ride height within range
  • Lowering range: 5-20mm from stock ride height
  • TUV-certified, German engineering and quality validation
  • Progressive spring rate, appropriate for mid-engine R8 dynamics
  • Fits all models and all engines in the 42-chassis range

Vehicle Fitment

Fits the following Audi vehicles with factory shock absorbers:

  • Audi R8 / Chassis 42 (2007-2015): All models, all engines

Installation Notes

Works with OEM shock absorbers. No damper replacement required. Alignment required after installation. Do not use with aftermarket or worn dampers.

  1. Verify OEM dampers are in good condition before installation. On 2007-2015 vehicles, inspect dampers for wear before proceeding.
  2. Set desired ride height at assembly before final torque
  3. Alignment required immediately after installation