The F90 M5 is one of the most electronically integrated M cars BMW has ever built, and the adaptive suspension runs deep into the car's systems. When aftermarket coilovers replace the factory EDC dampers, the control module detects the loss of signal immediately and sets fault codes that can interfere with other systems until you give it what it is looking for.
The KW EDC Cancellation Kit for the F90 M5 connects directly to the factory EDC harness connectors and sends the simulated signal the module needs to remain quiet. Fault codes clear and stay gone. Your xDrive, DSC, and M Dynamic Mode all continue to operate normally. No coding required, no dealer involvement, no programming tools needed.
Key Features
- Eliminates EDC fault codes and warning lights when using aftermarket coilovers
- Plug-and-play, connects to existing EDC wiring harness connectors
- Simulates OEM EDC damper signal to the factory control module
- Preserves full operation of DSC, xDrive, and M Dynamic Mode
- Required for all aftermarket coilover installations on BMW M5 F90
- KW-engineered specifically for the F90 M5 chassis and its integrated EDC system
Vehicle Fitment
Required for aftermarket coilover installations on EDC-equipped:
- BMW M5 / F90 (2018-2023): EDC is standard equipment on all F90 M5 models
Installation Notes
Plug-and-play installation. Connects to the existing EDC damper harness. No coding or programming required.
- Verify your vehicle is equipped with EDC (Electronic Damper Control) before ordering
- Install coilovers per coilover manufacturer instructions
- Connect EDC cancellation kit to existing harness connectors, no modification required
- Clear any stored fault codes after installation