The E92 M3 is still one of the best driver's cars BMW has ever produced, and owners keep building them years after production ended. If your E92 M3 has the EDC option and you have moved to aftermarket coilovers, that fault code is not going anywhere without a bypass. The EDC module will alert on every start until you address it with the right solution.
The KW EDC Cancellation Kit for the E92 M3 connects directly to the existing EDC harness connectors and simulates the signal the adaptive suspension module expects from the OEM dampers. The fault clears permanently. Your DSC and stability control systems stay fully operational. No modification to the factory wiring is required at any point.
Key Features
- Eliminates EDC fault codes and warning lights when using aftermarket coilovers
- Plug-and-play, connects to existing EDC wiring harness connectors
- Simulates OEM EDC damper signal to the factory control module
- Preserves full operation of DSC and stability control systems
- Required for all aftermarket coilover installations on EDC-equipped BMW M3 E92
- KW-engineered specifically for the E92 M3 chassis and its EDC configuration
Vehicle Fitment
Required for aftermarket coilover installations on EDC-equipped:
- BMW M3 / E92 (2008-2013): EDC was an option on the E92 M3, not standard on every car. Confirm your vehicle is equipped with EDC before ordering
Installation Notes
Plug-and-play installation. Connects to the existing EDC damper harness. No coding or programming required.
- Verify your vehicle is equipped with EDC (Electronic Damper Control) before ordering
- Install coilovers per coilover manufacturer instructions
- Connect EDC cancellation kit to existing harness connectors, no modification required
- Clear any stored fault codes after installation