The W204 C-Class and W207 E-Class covered a wide range of configurations across their production runs, and many of them came with ADS adaptive damping as standard or optional equipment. If your car has it and you're going to aftermarket coilovers, the ADS module will detect the missing damper signals and flag faults. One kit handles both chassis and clears the issue properly.

KW designed this ADS cancellation kit for the W204 and W207 platforms, accommodating both chassis in a single solution with correct signal simulation for each. Plug into the existing harness, no programming required, and your stability systems stay fully intact. It's the straightforward path between factory ADS and a coilover setup that works the way you want it to.

Key Features

  • Eliminates ADS fault codes and warning lights with aftermarket coilovers on W204 and W207 chassis
  • Plug-and-play connection to the existing factory adaptive damper wiring harness
  • Simulates correct OEM ADS damper signals to the factory module
  • Preserves full operation of ESP stability control and other driver aids
  • Single kit covers both Mercedes-Benz C-Class W204 and E-Class W207 chassis
  • No coding, programming, or module modifications required

Vehicle Fitment

Required for aftermarket coilover installations on ADS-equipped:

  • Mercedes-Benz C-Class (W204) 2007-2014: ADS-equipped variants
  • Mercedes-Benz E-Class Coupe / Cabriolet (W207) 2009-2015: ADS-equipped variants

Installation Notes

Plug-and-play installation. No coding or module programming required. Verify ADS is present on your specific vehicle before ordering, as it was optional on many W204 and W207 trim levels.

  1. Confirm ADS adaptive damping is equipped on your W204 or W207 (check option codes or build documentation)
  2. Install aftermarket coilovers per KW manufacturer instructions
  3. Connect KW ADS cancellation kit to the existing adaptive damper harness connectors
  4. Clear stored fault codes after installation is complete