AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI
AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 Pre-LCI / LCI

AutoTecknic Dry Carbon Side Body Trim Set - BMW G07 X7 (Pre-LCI / LCI)

$1,089.95
SKU: ATK-BM-0440

Minus Plus

The X7 is a big, flat-sided SUV, and from the side most of what you see is door and fender. The AutoTecknic Dry Carbon Side Body Trim Set puts real carbon fiber right there: six pieces covering the lower front fenders, front doors and rear doors on both sides of your G07 X7.

Every piece is pre-preg dry carbon fiber with a gloss clear coat, not a wrap, vinyl film or hydro-dipped plastic. The set fits both the 2019-2022 Pre-LCI and the 2023-2027 LCI X7, with or without the M Sport package.

Dry Carbon Side Body Trim for the BMW G07 X7

The set follows the factory lower body line: a fender trim behind each front wheel, then a trim along the bottom of each front and rear door. With carbon running the length of the car, the side profile looks lower and more finished, and it ties in with any other carbon pieces you already run.

Installed photos are shown for reference. The carbon mirror caps on the car are sold separately.

What's Included

  • 2 x Front fender trims (left and right), clip-in
  • 2 x Front door trims (left and right), double-sided tape mount
  • 2 x Rear door trims (left and right), double-sided tape mount

Key Features

  • 100% pre-preg dry carbon fiber, not a wrap or vinyl film
  • Gloss clear coat finish
  • Six-piece set covering both sides of the car
  • Clip-in fender trims and tape-mounted door trims
  • Fits both Pre-LCI and LCI G07 X7
  • Fits M Sport and non-M Sport models

Vehicle Fitment

Fits US-market BMW G07 X7 models, with or without the M Sport package:

  • G07 X7 Pre-LCI (2019-2022): xDrive40i, xDrive50i, M50i
  • G07 X7 LCI (2023-2027): xDrive40i, M60i

Not confirmed for the ALPINA XB7.

Installation Notes

Professional installation is recommended. The front fender trims clip into place. The front and rear door trims mount with double-sided tape, so surface prep decides how well they hold.

  1. Test-fit every piece before removing any tape backing.
  2. Clip the fender trims into place behind each front wheel.
  3. Clean the door mounting areas with isopropyl alcohol and let them dry fully.
  4. Peel the tape backing, line up each door trim and press firmly along its full length.
  5. Install at 60°F or warmer and wait 72 hours before washing the car so the tape can fully bond.