H&R Super Sport Spring Kit - BMW E82 128i/135i Coupe (2008-2013)

Sale price $330.65 Regular price $389.00

Black Friday price: $314.12 (applied in cart)

SKU: 50487-77

Add To Wishlist

The E82 coupe packs a lot of car into a short wheelbase, but BMW sent it out tall and soft, with a fender gap that makes the wheels look too small for the body. H&R Super Sport Springs take the E82 128i/135i Coupe lower than H&R Sport Springs and keep the body flatter in corners, on your factory shocks.

On the E82 128i/135i Coupe, H&R lists about 2.2 in. of drop up front and 1.6 in. at the rear. Exact lowering varies with engine, battery package and options.

Why H&R Super Sport Springs on the E82 128i/135i Coupe

Super Sport Springs have everything H&R puts into its Sport Springs, plus more lowering for the enthusiast who wants a bolder stance. The progressive rate design keeps the ride civil on the street, and the lower center of gravity improves handling. The springs are wound from 54SiCr6 spring steel and shot-peened, and H&R builds them not to set or sag.

Want a softer ride? H&R Sport Springs give a milder drop. If you want the lower look, Super Sport works on the factory shocks, but worn dampers struggle with any lowered spring, so replace high-mileage shocks at the same time.

What's Included

  • 2 front springs
  • 2 rear springs

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 2.2 in. front and 1.6 in. rear lowering (H&R figures)
  • Works with the factory shocks, no modifications needed
  • More lowering than H&R Sport Springs, with a progressive rate for street comfort
  • 54SiCr6 spring steel, shot-peened, built not to set or sag
  • Every spring is tested before it leaves H&R's ISO 9001 certified plant in Germany
  • H&R part number 50487-77
  • Limited lifetime warranty from H&R

Vehicle Fitment

The H&R Super Sport Spring Kit 50487-77 fits these BMW models:

  • BMW E82 128i Coupe (2008-2013)
  • BMW E82 135i Coupe (2008-2013)

Lowering can vary on cars with factory sport suspension. Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

This is a standard spring swap that a suspension shop can handle in a few hours. If you do it yourself, you need a proper strut spring compressor. Never take a front strut apart without one.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts, compress the factory springs, and move the top mounts and hardware onto the H&R springs.
  3. Replace the rear springs, following the H&R instructions supplied with the kit.
  4. Tighten the suspension bolts with the car at ride height so the rubber bushings are not preloaded.
  5. Get a four-wheel alignment once the car is back on the ground.