H&R Sport Spring Kit - BMW E60 545i Sedan (2004-2006 w/ Self-Leveling)

Sale price $279.65 Regular price $329.00

Black Friday price: $265.67 (applied in cart)

SKU: 29255-4

Add To Wishlist

The E60 545i has a V8 under the hood, and its weight shows up as body roll on the factory springs. H&R Sport Springs lower the E60 545i Sedan and cut body roll, and they work with your factory shocks.

This version is for cars with factory self-leveling suspension. H&R lists about 1.3 in. of drop up front. The kit replaces the front springs only, and the factory rear suspension stays in place. If your car does not have self-leveling, use the version for cars without self-leveling instead.

Why H&R Sport Springs on the E60 545i Sedan

Sport Springs are H&R's best-selling product. The progressive rate design keeps the ride comfortable over rough pavement, while the lower center of gravity reduces body roll and sharpens turn-in. Every spring is wound from 54SiCr6 spring steel and shot-peened, and H&R builds them not to set or sag over time.

Worried about ride quality? H&R tunes Sport Spring rates for daily street use on the factory shocks. Worn shocks are the bigger risk. Tired dampers struggle to control any lowered spring, so if yours have high miles, replace them at the same time.

What's Included

  • 2 front springs

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 1.3 in. front lowering, front springs only (H&R figures)
  • Works with the factory shocks, no modifications needed
  • Progressive rate design for a comfortable street ride
  • 54SiCr6 spring steel, shot-peened, built not to set or sag
  • Every spring is tested before it leaves H&R's ISO 9001 certified plant in Germany
  • H&R part number 29255-4
  • Limited lifetime warranty from H&R

Vehicle Fitment

The H&R Sport Spring Kit 29255-4 fits these BMW models with factory self-leveling suspension:

  • BMW E60 545i Sedan (2004-2006)

Lowering can vary on cars with factory sport suspension. Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

This is a standard spring swap that a suspension shop can handle in a few hours. If you do it yourself, you need a proper strut spring compressor. Never take a front strut apart without one.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts, compress the factory springs, and move the top mounts and hardware onto the H&R springs.
  3. Tighten the suspension bolts with the car at ride height so the rubber bushings are not preloaded.
  4. Get a four-wheel alignment once the car is back on the ground.