The X7's roof line ends in a short, plain factory spoiler, and from behind that leaves a lot of flat tailgate. The SQ-Aero Dry Carbon Fiber Roof Spoiler gives the top of the hatch a sharper, more sculpted edge, with raised end sections that run down both sides of the rear glass.
It is pre-preg dry carbon fiber in a gloss twill weave, not a wrap, vinyl film or hydro-dipped plastic. The spoiler weighs about 1,095 g (2.4 lb) and measures 124 cm (48.8 in) across, so it adds the look without adding weight up high.
Dry Carbon Fiber Roof Spoiler for the BMW G07 X7
The spoiler follows the factory roof line and wraps down both sides of the rear glass, and the third brake light stays visible underneath. It mounts with automotive double-sided tape, so there is no drilling into your tailgate. The roof and tailgate carried over through the 2023 refresh, so the same spoiler fits both the Pre-LCI and LCI X7.
Installed photos are shown for reference. The rear diffuser, side trims and other carbon parts on the car are sold separately.
What's Included
- 1 x SQ-Aero dry carbon fiber roof spoiler
Key Features
- 100% pre-preg dry carbon fiber, not a wrap or vinyl film
- Gloss twill weave with a clear coat finish
- About 1,095 g (2.4 lb)
- 124 cm (48.81 in) wide, 33 cm (12.99 in) tall
- Double-sided tape mount, no drilling
- Fits both Pre-LCI and LCI G07 X7
Vehicle Fitment
Fits US-market BMW G07 X7 models, Pre-LCI and LCI:
- G07 X7 Pre-LCI (2019-2022)
- G07 X7 LCI (2023-2027)
Installation Notes
Professional installation is recommended. The spoiler mounts with double-sided tape, so surface prep decides how well it holds.
- Test-fit the spoiler before removing any tape backing.
- Clean the mounting surface with isopropyl alcohol and let it dry fully.
- Peel the tape backing, line up the spoiler and press firmly along its full length.
- Install at 60°F or warmer and wait 72 hours before washing the car so the tape can fully bond.
