MMX Performance N54 Charge Pipe - BMW E82 135i / 1M / E9X 335i

Regular price $311.06

Black Friday price: $295.51 (applied in cart)

SKU: MMR02-0101

Add To Wishlist

Turn up the boost on an N54 and the factory plastic charge pipe is usually the first thing to let go, often on a hard pull, sometimes on a basic Stage 1 tune. The MMX Performance N54 Charge Pipe replaces it with aluminum built to hold far more boost than the stock part ever could.

It bolts in where the OEM pipe came out, with no cutting, and it is ready for meth or water injection when you are.

N54 Charge Pipe Construction

Smooth-bore aluminum pipework flows better than the OE plastic and resists deformation under boost and vacuum. A CNC-machined hose end seals cleanly at the coupler, and integrated 1/8 inch bungs give you a clean injection port later. The crinkle black powder coat and laser-etched MMX logo finish it off.

What's Included

  • 1 x aluminum charge pipe (MMR02-0101)
  • 1 x silicone coupler hose
  • 1 x replacement c-clip
  • Hose clamps and O-ring
  • 1/8 inch bung(s) for methanol or water injection

Key Features

  • Direct OE replacement for the N54 plastic charge pipe
  • Smooth-bore aluminum improves airflow over OE plastic
  • CNC-machined hose end for a leak-free coupler seal
  • Crinkle black powder-coat finish
  • 1-year MMX warranty against defects in materials and workmanship
  • Part number: MMR02-0101

Vehicle Fitment

Fits BMW models with the N54 3.0L twin-turbo inline-six:

  • BMW E82 / E88 135i (2008-2010)
  • BMW E82 1M Coupe (2011)
  • BMW E90 / E92 / E93 335i (2007-2010)
  • BMW E92 / E93 335is (2011-2013)

Emissions: This charge pipe does not carry a CARB Executive Order. In California and states that follow CARB rules it is sold for racing and off-road use only.

Installation Notes

A DIY-friendly job with basic hand tools in about an hour.

  1. Remove the engine cover and the factory charge pipe.
  2. Fit the O-ring and c-clip, then connect the MMX pipe at the throttle body.
  3. Attach the silicone coupler at the intercooler side and tighten the clamps.
  4. Cap or plumb the 1/8 inch bungs, then boost-test for leaks.