H&R TRAK+ DR Wheel Spacers 11-20mm (Pair) - BMW G90 M5 / G99 M5 Touring 5x132

Sale price $98.96 Regular price $109.95

Black Friday price: $94.01 (applied in cart)

SKU: 225455664

Add To Wishlist

The G90 M5 and G99 M5 Touring sit on wide, heavy wheels that still end up tucked behind the fender line from the factory. H&R TRAK+ DR wheel spacers push them out to fill the arches, and the wider track adds stability when you lean on all that power.

DR is H&R's classic spacer design. It sits between the hub and the wheel and keeps the M5's 5x132 bolt pattern and 66.5mm center bore, so the wheel stays hubcentric. Choose your width and finish above. Each kit is a pair for one axle.

Why H&R TRAK+ Wheel Spacers on the G90 M5

TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.

DR spacers need longer 14x1.25 wheel bolts, sold separately. Your factory bolts lose thread engagement once a spacer is in place, so plan new bolts into the same order. Tell us your spacer width and wheels and we will help you match the right bolt.

What's Included

  • 2 H&R TRAK+ DR spacers in the width and finish you choose (one axle)

Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.

Key Features

  • Widths of 11mm, 13mm, 15mm, 18mm and 20mm per side
  • Silver or black finish
  • Fits the 5x132 bolt pattern with a 66.5mm center bore
  • Hubcentric fit on the M5 hub
  • Full contact with the hub face for even load distribution
  • DR design: uses longer 14x1.25 wheel bolts, sold separately
  • Made in Germany
  • Sold as a pair. Order two pairs for all four corners.

Vehicle Fitment and Available Widths

The H&R TRAK+ DR spacers in this listing fit these models:

  • BMW G90 M5 Sedan (2025-2026): 11mm, 13mm, 15mm, 18mm and 20mm
  • BMW G99 M5 Touring (2025-2026): 11mm, 13mm, 15mm, 18mm and 20mm

H&R lists these widths for each model. Not sure about your car? Send us your VIN and we will confirm before you order.

Installation Notes

DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. At the wider settings, check fender and brake clearance with your exact wheel and tire before you drive.

  1. Order wheel bolts that are longer than your current bolts by the spacer width, with the same 14x1.25 thread and the same head and seat type.
  2. Clean the hub face and remove any rust or scale so the spacer sits flat.
  3. Fit the spacer on the hub, mount the wheel and tighten the new bolts to factory torque in a star pattern.
  4. Turn the wheel by hand and check that nothing rubs. The wheel should spin freely.
  5. Re-check wheel bolt torque after the first short drive.