H&R TRAK+ DR Wheel Spacers 3-20mm (Pair) - BMW F-Series 5x120 (F22, F30, F32, F80 M3, F82 M4, F87 M2)
Black Friday price: $76.91 (applied in cart)
- 3mm
- 5mm
- 10mm
- 12mm
- 13mm
- 15mm
- 20mm
- Silver
- Black
The F30, F32 and F8x M cars leave the factory with the wheels tucked inboard, so even good wheels can look narrow in the arches. H&R TRAK+ DR wheel spacers push the wheels out to fill the fenders, and the wider track adds stability through corners.
DR is H&R's classic spacer design. It sits between the hub and the wheel and keeps the factory 5x120 bolt pattern and 72.5mm center bore. The 10mm and wider spacers have their own centering lip, so the wheel stays hubcentric. The 3mm and 5mm spacers are flat discs that use the factory hub to center the wheel. Choose your width and finish above. Each kit is a pair for one axle.
Why H&R TRAK+ Wheel Spacers Instead of Generic Spacers
TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.
DR spacers need longer 14x1.25 wheel bolts, sold separately. Your factory bolts lose thread engagement once a spacer is in place, so plan new bolts into the same order. Tell us your spacer width and wheels and we will help you match the right bolt. On most of these cars H&R limits the 10mm and 12mm spacers to the front axle. The width list below shows what fits front and rear on your car.
What's Included
- 2 H&R TRAK+ DR spacers in the width and finish you choose (one axle)
Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.
Key Features
- Widths of 3mm, 5mm, 10mm, 12mm, 13mm, 15mm and 20mm per side
- Silver or black finish
- Fits the 5x120 bolt pattern with a 72.5mm center bore
- Hubcentric centering lip on 10mm and wider. The 3mm and 5mm spacers are flat discs.
- Full contact with the hub face for even load distribution
- DR design: uses longer 14x1.25 wheel bolts, sold separately
- Made in Germany
- Sold as a pair. Order two pairs for all four corners.
Vehicle Fitment and Available Widths
The H&R TRAK+ DR spacers in this listing fit these models:
- BMW F22 228i / 230i / M235i / M240i Coupe, incl. M235i / M240i xDrive (2014-2021): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F23 228i / 230i / M235i / M240i Convertible (2015-2021): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F30 320i / 328i / 330i / 335i / 340i Sedan, incl. xDrive (2012-2018): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F31 328i xDrive / 328d xDrive / 330i xDrive Sports Wagon (2014-2019): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F34 328i / 330i / 335i / 340i xDrive Gran Turismo (2014-2019): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F32 428i / 430i / 435i / 440i Coupe, incl. xDrive (2014-2020): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F33 428i / 430i / 435i / 440i Convertible, incl. xDrive (2014-2020): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F36 428i / 430i / 435i / 440i Gran Coupe, incl. xDrive (2015-2020): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F80 M3 Sedan (2015-2018): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F82 M4 Coupe (2015-2020), F83 M4 Convertible (2015-2020): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F80 M3 CS (2018), F82 M4 CS (2018), F82 M4 GTS (2016): 10mm, 12mm, 13mm and 15mm
- BMW F87 M2 (2016-2018), M2 Competition (2019-2021), M2 CS (2020): 3mm, 5mm, 10mm, 12mm, 13mm and 15mm
- BMW F10 M5 (2013-2016): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F06 M6 Gran Coupe (2014-2019): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F12 M6 Convertible (2013-2018): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F13 M6 Coupe (2013-2018): 3mm, 5mm, 10mm, 12mm, 13mm, 15mm and 20mm
H&R lists these widths for each model. Front only means the spacer is approved for the front axle on that car. Not sure about your car? Send us your VIN and we will confirm before you order.
Installation Notes
DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. On 3mm, 5mm, 10mm, 12mm and 13mm spacers, H&R requires you to measure first. The factory hub must still stick out far enough past a 3mm or 5mm spacer to center the wheel, and on the 10mm, 12mm and 13mm spacers the hub height and the inner bevel of your wheel must be checked so the wheel seats fully on the spacer.
- Order wheel bolts that are longer than your current bolts by the spacer width, with the same 14x1.25 thread and the same head and seat type.
- Measure the hub and the wheel as described in the H&R instructions if you are using a 3mm, 5mm, 10mm, 12mm or 13mm spacer.
- Clean the hub face and remove any rust or scale so the spacer sits flat.
- Fit the spacer on the hub, mount the wheel and tighten the new bolts to factory torque in a star pattern.
- Turn the wheel by hand and check that nothing rubs. The wheel should spin freely.
- Re-check wheel bolt torque after the first short drive.
H&R TRAK+ DR Wheel Spacers 3-20mm (Pair) - BMW F-Series 5x120 (F22, F30, F32, F80 M3, F82 M4, F87 M2)
Width: 3mm, Finish: Silver
The F30, F32 and F8x M cars leave the factory with the wheels tucked inboard, so even good wheels can look narrow in the arches. H&R TRAK+ DR wheel spacers push the wheels out to fill the fenders, and the wider track adds stability through corners.
DR is H&R's classic spacer design. It sits between the hub and the wheel and keeps the factory 5x120 bolt pattern and 72.5mm center bore. The 10mm and wider spacers have their own centering lip, so the wheel stays hubcentric. The 3mm and 5mm spacers are flat discs that use the factory hub to center the wheel. Choose your width and finish above. Each kit is a pair for one axle.
Why H&R TRAK+ Wheel Spacers Instead of Generic Spacers
TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.
DR spacers need longer 14x1.25 wheel bolts, sold separately. Your factory bolts lose thread engagement once a spacer is in place, so plan new bolts into the same order. Tell us your spacer width and wheels and we will help you match the right bolt. On most of these cars H&R limits the 10mm and 12mm spacers to the front axle. The width list below shows what fits front and rear on your car.
What's Included
- 2 H&R TRAK+ DR spacers in the width and finish you choose (one axle)
Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.
Key Features
- Widths of 3mm, 5mm, 10mm, 12mm, 13mm, 15mm and 20mm per side
- Silver or black finish
- Fits the 5x120 bolt pattern with a 72.5mm center bore
- Hubcentric centering lip on 10mm and wider. The 3mm and 5mm spacers are flat discs.
- Full contact with the hub face for even load distribution
- DR design: uses longer 14x1.25 wheel bolts, sold separately
- Made in Germany
- Sold as a pair. Order two pairs for all four corners.
Vehicle Fitment and Available Widths
The H&R TRAK+ DR spacers in this listing fit these models:
- BMW F22 228i / 230i / M235i / M240i Coupe, incl. M235i / M240i xDrive (2014-2021): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F23 228i / 230i / M235i / M240i Convertible (2015-2021): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F30 320i / 328i / 330i / 335i / 340i Sedan, incl. xDrive (2012-2018): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F31 328i xDrive / 328d xDrive / 330i xDrive Sports Wagon (2014-2019): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F34 328i / 330i / 335i / 340i xDrive Gran Turismo (2014-2019): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F32 428i / 430i / 435i / 440i Coupe, incl. xDrive (2014-2020): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F33 428i / 430i / 435i / 440i Convertible, incl. xDrive (2014-2020): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F36 428i / 430i / 435i / 440i Gran Coupe, incl. xDrive (2015-2020): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F80 M3 Sedan (2015-2018): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F82 M4 Coupe (2015-2020), F83 M4 Convertible (2015-2020): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F80 M3 CS (2018), F82 M4 CS (2018), F82 M4 GTS (2016): 10mm, 12mm, 13mm and 15mm
- BMW F87 M2 (2016-2018), M2 Competition (2019-2021), M2 CS (2020): 3mm, 5mm, 10mm, 12mm, 13mm and 15mm
- BMW F10 M5 (2013-2016): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F06 M6 Gran Coupe (2014-2019): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F12 M6 Convertible (2013-2018): 3mm, 5mm, 13mm, 15mm and 20mm, plus 10mm and 12mm front only
- BMW F13 M6 Coupe (2013-2018): 3mm, 5mm, 10mm, 12mm, 13mm, 15mm and 20mm
H&R lists these widths for each model. Front only means the spacer is approved for the front axle on that car. Not sure about your car? Send us your VIN and we will confirm before you order.
Installation Notes
DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. On 3mm, 5mm, 10mm, 12mm and 13mm spacers, H&R requires you to measure first. The factory hub must still stick out far enough past a 3mm or 5mm spacer to center the wheel, and on the 10mm, 12mm and 13mm spacers the hub height and the inner bevel of your wheel must be checked so the wheel seats fully on the spacer.
- Order wheel bolts that are longer than your current bolts by the spacer width, with the same 14x1.25 thread and the same head and seat type.
- Measure the hub and the wheel as described in the H&R instructions if you are using a 3mm, 5mm, 10mm, 12mm or 13mm spacer.
- Clean the hub face and remove any rust or scale so the spacer sits flat.
- Fit the spacer on the hub, mount the wheel and tighten the new bolts to factory torque in a star pattern.
- Turn the wheel by hand and check that nothing rubs. The wheel should spin freely.
- Re-check wheel bolt torque after the first short drive.

