H&R TRAK+ 20mm Bolt-On Hub Adapter (Pair) - BMW E39 5 Series (74mm to 72.5mm)

Sale price $197.96 Regular price $219.95

Black Friday price: $188.06 (applied in cart)

SKU: 4075740725

Add To Wishlist

Want to run wheels from a newer BMW on your E39? Most 5x120 BMW wheels from the E46, E9X and F30 era are bored at 72.5mm. Your E39 hub is 74mm, so those wheels will not seat without help.

The H&R TRAK+ 20mm Bolt-On Hub Adapter (part 4075740725) bolts to your hub and gives the wheel a 72.5mm centering lip. The wheel stays hubcentric, sits 20mm further out for a flusher stance, and bolts to the adapter with your existing wheel bolts.

Why the Bolt-On H&R Hub Adapter for the E39

This is H&R's DRA design. The adapter bolts to the hub with its own included bolts and has threaded holes for your wheel bolts. That means no hunting for extra-long wheel bolts, and the wheels come off and go back on just like stock once the adapters are installed.

What's Included

  • 2 H&R TRAK+ 20mm bolt-on hub adapters (one axle)
  • Hardware to bolt the adapters to the hub

Product photo shows a representative H&R TRAK+ spacer. Size, finish and packaging vary by application.

Key Features

  • Adapts 5x120 wheels with a 72.5mm center bore to the E39's 74mm hub
  • 20mm width per side
  • Bolt-on DRA design: adapter bolts to the hub, wheel bolts to the adapter with your existing bolts
  • Hubcentric on both the hub and the wheel side
  • Made in Germany
  • Sold as a pair. Order two pairs for all four corners.

Vehicle Fitment

The H&R TRAK+ 20mm Hub Adapter 4075740725 fits:

  • BMW E39 5 Series (1997-2003): 525i, 528i, 530i, 540i

Not sure about your car? Send us your VIN and we will confirm before you order.

Installation Notes

A straightforward bolt-on job with a torque wrench and basic tools. Professional installation is recommended.

  1. Remove the wheel and clean the hub face so the adapter sits flat.
  2. Bolt the adapter to the hub with the included hardware and tighten to the torque in H&R's instructions.
  3. Mount the wheel on the adapter with your existing wheel bolts and tighten to BMW factory torque in a star pattern.
  4. Turn the wheel by hand and confirm nothing contacts the brake parts.
  5. Re-check torque on the adapter bolts and wheel bolts after the first short drive.