H&R Street Performance Coilover Kit - BMW F87 M2 Competition (2019-2021)

Sale price $2,322.00 Regular price $2,580.00

Black Friday price: $2,205.90 (applied in cart)

SKU: 50480

Add To Wishlist

The M2 Competition brought the S55 engine into the F87's short, wide body, and it drives like a proper small M car. A lower stance suits it. H&R Street Performance Coilovers replace the F87 M2 Competition suspension with a matched, height-adjustable setup built for the street.

H&R lists an adjustment range of about 1.2 to 1.6 in. of drop up front and 0.8 to 1.8 in. at the rear.

H&R Street Performance Coilovers on the F87 M2 Competition

H&R pioneered coilovers tuned for the street, and this kit follows that formula. Monotube gas dampers are custom valved to work with H&R progressive rate springs, and the fully threaded shock body lets you set ride height with easy-to-adjust spring seats.

Every coilover install changes more than ride height. Set the height with the car fully assembled, then get an alignment. If the factory dampers are worn, a complete kit replaces them and adds adjustment in one job.

What's Included

  • Height-adjustable front coilover struts
  • Rear dampers and springs with height adjustment

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 1.2 to 1.6 in. front and 0.8 to 1.8 in. rear adjustable lowering (H&R figures)
  • Height adjustable with a fully threaded shock body
  • Monotube gas dampers custom valved for H&R progressive rate springs
  • H&R part number 50480
  • Two-year warranty from H&R

Vehicle Fitment

The H&R Street Performance Coilover Kit 50480 fits these BMW models:

  • BMW F87 M2 Competition (2019-2021)

H&R lists this application as a tuner fitment, so have it installed by a shop experienced with lowered BMWs. Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

A coilover install is a bigger job than a spring swap, so most owners have a shop with BMW experience do it. Check your factory top mounts while the struts are out, and replace them if they are cracked or worn.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts and install the H&R front coilovers.
  3. Replace the rear shocks and springs with the H&R rear components.
  4. Set the ride height front and rear, then tighten the suspension bolts at ride height.
  5. Check tire clearance at full lock and under compression, then get a four-wheel alignment.