H&R RSS Coilover Kit - BMW E39 M5 (1999-2003)

Sale price $1,962.00 Regular price $2,180.00

Black Friday price: $1,863.90 (applied in cart)

SKU: RSS50420-1

Add To Wishlist

The E39 M5 is a modern classic, a big V8 sedan that still drives brilliantly, and it deserves suspension in top condition. H&R RSS Coilovers give the E39 M5 a firm, focused setup with adjustable ride height, for the driver who wants the most feedback from the car.

H&R lists an adjustment range of about 0.75 to 1.8 in. of drop up front and 0.5 to 1.4 in. at the rear.

H&R RSS Coilovers on the E39 M5

H&R developed RSS Coilovers on the Nürburgring for performance-minded drivers. Compared with H&R's street coilovers they use more spring rate and more shock valving, for flat cornering and precise directional control. Like every H&R coilover, they use a fully threaded shock body, not a sleeve-over design.

Because RSS is tuned for feedback and control, it suits drivers who put handling ahead of a soft ride. For a more comfortable street setup, H&R Street Performance Coilovers are the better fit.

What's Included

  • Height-adjustable front coilover struts
  • Rear dampers and springs with height adjustment

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 0.75 to 1.8 in. front and 0.5 to 1.4 in. rear adjustable lowering (H&R figures)
  • Height adjustable with a fully threaded shock body
  • More spring rate and shock valving than H&R street coilovers
  • Developed and tested on the Nürburgring
  • H&R part number RSS50420-1

Vehicle Fitment

The H&R RSS Coilover Kit RSS50420-1 fits these BMW models:

  • BMW E39 M5 (1999-2003)

Wheel offset is critical. Spacers may be needed with the standard wheel and tire setup. Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

A coilover install is a bigger job than a spring swap, so most owners have a shop with BMW experience do it. Check your factory top mounts while the struts are out, and replace them if they are cracked or worn.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts and install the H&R front coilovers.
  3. Replace the rear shocks and springs with the H&R rear components.
  4. Set the ride height front and rear, then tighten the suspension bolts at ride height.
  5. Check tire clearance at full lock and under compression, then get a four-wheel alignment.