H&R Rear Sway Bar - BMW G80 M3 / G82/G83 M4 / G87 M2

Sale price $503.10 Regular price $559.00

Black Friday price: $477.94 (applied in cart)

SKU: 71616

Add To Wishlist

The S58 cars have grip to spare, but at the limit a G80, G82 or G87 still carries more body roll than most owners expect from an M car. A stiffer bar takes that lean out without touching ride quality over bumps that hit both wheels.

The H&R Rear Sway Bar (part 71616) is a 27mm bar that bolts in where the factory rear bar was. It is non-adjustable and drops straight into your G80 M3 / G82/G83 M4 / G87 M2 with no cutting or drilling.

Why Upgrade the Rear Sway Bar on Your BMW G80 / G82 / G87 / G83

A sway bar links the left and right wheels. When the car leans in a corner, the bar twists and pushes back, keeping the body flatter. A stiffer bar means less lean, quicker response to the wheel and a car that settles faster in transitions. Unlike stiffer springs, a sway bar only works when one side compresses more than the other, so ride quality over bumps that hit both wheels stays close to stock.

A stiffer rear bar is the quickest way to reduce understeer. It shifts the balance toward the rear so the car rotates more willingly mid-corner. Go one step at a time if you track the car.

What's Included

  • H&R rear sway bar, 27mm

Key Features

  • 27mm rear bar, non-adjustable
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Cuts body roll while keeping ride quality over bumps close to stock
  • Genuine H&R part, matched to these chassis by H&R

Vehicle Fitment

The H&R Rear Sway Bar 71616 fits these US-market BMW models:

  • BMW G80 M3 / M3 Competition Sedan (2021-2026, RWD)
  • BMW G82 M4 / M4 Competition Coupe (2021-2026, RWD)
  • BMW G87 M2 Coupe (2023-2026)
  • BMW G87 M2 CS (2026)
  • BMW G80 M3 Competition xDrive Sedan (2022-2026)
  • BMW G82 M4 Competition xDrive Coupe (2022-2026)
  • BMW G83 M4 Competition xDrive Convertible (2022-2025)

Not sure which version your car needs? Send us your VIN and we will confirm before you order.

Installation Notes

This is a bolt-on job with basic hand tools, a torque wrench and a way to safely lift the car. Access to the rear bar varies by chassis, and on some cars other parts have to be moved out of the way first. Professional installation is recommended if you are not comfortable working on suspension.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bar and remove the bushing brackets.
  3. Remove the factory bar and fit the H&R bar in its place, following the instructions supplied with the bar.
  4. Reconnect the end links.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to BMW factory spec.