MMX Performance Wheel Mounting Guide Pin - BMW / MINI M12x1.5 / M14x1.25

Regular price $28.06

Black Friday price: $26.66 (applied in cart)

SKU: MMR37-0002

Add To Wishlist

Cars with wheel bolts give you nothing to hang the wheel on. Every wheel change means holding the wheel against the hub with one hand while you line up the first bolt with the other, and that is how wheels get scratched, bolts cross-thread, and calipers get hit.

The MMX wheel mounting guide pin acts as a temporary stud, so the wheel hangs centered while you fit the bolts.

Wheel Guide Pin That Hangs the Wheel for You

Screw the pin into one hub bolt hole, slide the wheel onto it, and start the other bolts with both hands free. Then remove the pin and fit the last bolt in its place. At 150mm long it holds the wheel clear while you locate it, and the rounded, tapered end guides the wheel on without marking the finish.

7075-T6 Aluminum, Hard Anodized

The pin is machined from 7075-T6 aluminum and hard anodized for corrosion and wear resistance, with a knurled section so you can thread it in and out by hand. It is small enough to keep in a toolkit. If you already run the MMX stud and nut kit, you do not need it, because the studs do the same job permanently.

What's Included

  • (1) MMX wheel mounting guide pin in your selected thread

Key Features

  • Temporary stud for cars that use wheel bolts
  • 150mm long
  • 7075-T6 aluminum, hard anodized
  • Rounded, tapered end protects the wheel
  • Knurled section for hand threading
  • M12x1.5 (MMR37-0002) or M14x1.25 (MMR37-0001)
  • 1-year manufacturer warranty, designed and tested in the UK

Vehicle Fitment

Fits BMW and MINI models that locate the wheel with bolts rather than studs. Choose the thread that matches your hub:

  • M12x1.5 hubs: MMR37-0002
  • M14x1.25 hubs: MMR37-0001

Sold individually. One pin is enough for a wheel change. Not needed on cars running the MMX stud and nut kit.

Installation Notes

This is an installation aid only. Remove it before fitting the final wheel bolt, and never drive with it fitted.

  1. Thread the pin into a hub bolt hole by hand.
  2. Slide the wheel onto the pin.
  3. Start the remaining wheel bolts.
  4. Remove the pin, fit the last bolt, and torque all bolts to the BMW specification.