H&R Rear Sway Bar - BMW G20 3 Series / G22/G23 4 Series / G42 2 Series

Sale price $395.10 Regular price $439.00

Black Friday price: $375.34 (applied in cart)

SKU: 71462

Add To Wishlist

The G20 and G22 cars are quick and composed, but push one hard into a tight on-ramp and the nose still leans and washes wide before the rear settles. Stiffer bars tie the chassis together so the car turns in flat and holds its line.

The H&R Rear Sway Bar (part 71462) is a 19mm bar that bolts in where the factory rear bar was. It is non-adjustable and drops straight into your G20 3 Series / G22/G23 4 Series / G42 2 Series with no cutting or drilling.

Why Upgrade the Rear Sway Bar on Your BMW G20 / G22 / G23 / G42

A sway bar links the left and right wheels and resists body lean in corners. A stiffer bar means less roll and quicker response, while ride quality over bumps that hit both wheels stays close to stock.

A stiffer rear bar is the quickest way to reduce understeer. It shifts the balance toward the rear so the car rotates more willingly mid-corner. Go one step at a time if you track the car.

What's Included

  • H&R rear sway bar, 19mm

Product photo shows a representative H&R sway bar. Color, shape and packaging vary by application.

Key Features

  • 19mm rear bar, non-adjustable
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Genuine H&R part

Vehicle Fitment

The H&R Rear Sway Bar 71462 fits these US-market BMW models:

  • BMW G20 330i / M340i Sedan (2019-2026, RWD)
  • BMW G22 430i Coupe (2021-2026, RWD)
  • BMW G23 430i / M440i Convertible (2021-2026, RWD)
  • BMW G42 M240i Coupe (2023-2026, RWD)
  • BMW G20 330i xDrive / M340i xDrive Sedan (2019-2026)
  • BMW G20 330e xDrive Sedan (2021-2024)
  • BMW G22 430i xDrive / M440i xDrive Coupe (2021-2026)
  • BMW G23 M440i xDrive Convertible (2022-2026)
  • BMW G42 M240i xDrive Coupe (2022-2026)

Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

Bolt-on install with hand tools, a torque wrench and a safe way to lift the car. Access to the rear bar varies by chassis. Professional installation is recommended.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bar and remove the bushing brackets.
  3. Remove the factory bar and fit the H&R bar in its place, following the instructions supplied with the bar.
  4. Reconnect the end links.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to BMW factory spec.