H&R Front Sway Bar - BMW G20 330i/M340i / G22 430i / G42 M240i (RWD)

Sale price $395.10 Regular price $439.00

Black Friday price: $375.34 (applied in cart)

SKU: 70462

Add To Wishlist

The G20 and G22 cars are quick and composed, but push one hard into a tight on-ramp and the nose still leans and washes wide before the rear settles. Stiffer bars tie the chassis together so the car turns in flat and holds its line.

The H&R Front Sway Bar (part 70462) is a 28mm bar that bolts in where the factory front bar was. It is non-adjustable and drops straight into your G20 330i/M340i / G22 430i / G42 M240i (RWD) with no cutting or drilling.

Why Upgrade the Front Sway Bar on Your BMW G20 / G22 / G23 / G42

A sway bar links the left and right wheels. When the car leans in a corner, the bar twists and pushes back, keeping the body flatter. A stiffer bar means less lean, quicker response to the wheel and a car that settles faster in transitions. Unlike stiffer springs, a sway bar only works when one side compresses more than the other, so ride quality over bumps that hit both wheels stays close to stock.

A stiffer front bar reduces lean at the front and makes the car feel more stable and precise on turn-in. Pair it with the matching H&R rear bar if you want to keep the factory front-to-rear balance.

What's Included

  • H&R front sway bar, 28mm

Product photo shows a representative H&R sway bar. Color, shape and packaging vary by application.

Key Features

  • 28mm front bar, non-adjustable
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Cuts body roll while keeping ride quality over bumps close to stock
  • Genuine H&R part, matched to these chassis by H&R

Vehicle Fitment

The H&R Front Sway Bar 70462 fits these US-market BMW models:

  • BMW G20 330i / M340i Sedan (2019-2026, RWD)
  • BMW G22 430i Coupe (2021-2026, RWD)
  • BMW G23 430i / M440i Convertible (2021-2026, RWD)
  • BMW G42 M240i Coupe (2023-2026, RWD)

Not sure which version your car needs? Send us your VIN and we will confirm before you order.

Installation Notes

This is a bolt-on job with basic hand tools, a torque wrench and a way to safely lift the car. Access to the front bar varies by chassis, and on some cars other parts have to be moved out of the way first. Professional installation is recommended if you are not comfortable working on suspension.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bar and remove the bushing brackets.
  3. Remove the factory bar and fit the H&R bar in its place, following the instructions supplied with the bar.
  4. Reconnect the end links.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to BMW factory spec.