FC Wheel Spacer Kit - BMW / Supra 5x112 - No Lug Bolts

Regular price $169.00

Black Friday price: $160.55 (applied in cart)

SKU: FC-BWSK-112-005-NOBOLTS

Add To Wishlist

You already did the hard part. Your car runs a stud conversion, so wheel changes take minutes and you never fight a lug bolt on the hub again. A standard spacer kit would put a set of extended bolts in the box that you will never use. This kit leaves them out, so you pay for the spacers and nothing else.

These are the same Future Classic 5x112 wheel spacers sold in the full kits: hubcentric, CNC machined from 6061-T6 aluminum, and developed with Fall-Line Motorsports. They fit G chassis BMWs, the X M models and the A90 Supra.

Built for Stud Conversion Cars Only

This kit does not include lug bolts or studs. You need a stud conversion kit already installed, or one you are installing at the same time. Before you order, check that your studs are long enough for the spacer thickness you pick. Thicker spacers need longer studs to get full thread engagement on the lug nut. If you are not sure, send us your stud kit details and we will help you size it.

Still on factory bolts? Our FC steel M14 stud kit is the matching upgrade. Prefer to keep bolts? The BMW 5x112 kit, M-SAV kit and Supra kit include them.

Why Future Classic 5x112 Wheel Spacers

Future Classic developed and tested these spacers with Fall-Line Motorsports in real track conditions. They are hubcentric, so the hub carries the load and the wheel stays centered, just like a wheel mounted without a spacer. Lug-centric spacers leave the wheel hanging on the bolts, which is where most vibration complaints start. Each spacer also bolts to the hub with its own hub bolts, so it stays put when you pull a wheel at the track.

What's Included

  • 2 Future Classic 5x112 wheel spacers (one axle)
  • 4 hub bolts to secure the spacers to the hub
  • Copaslip copper anti-seize with applicator brush
  • Future Classic livery box with the Frank Stella 3.0 CSL art car print

Key Features

  • For cars running a stud conversion kit. No lug bolts included
  • Hubcentric design keeps the wheel centered and vibration free
  • CNC machined from 6061-T6 aluminum
  • Black anodized finish for corrosion and wear resistance
  • Secures to the hub with its own hub bolts for track and competition use
  • Pocketed design keeps weight down
  • Developed and track tested with Fall-Line Motorsports
  • Available in 5mm, 12mm, 15mm and 18mm

Vehicle Fitment

The Future Classic 5x112 Wheel Spacer Kit (No Lug Bolts) fits these models when fitted with a stud conversion kit:

  • BMW 2 Series Coupe G42 (2022-2026)
  • BMW 2 Series Gran Coupe F44 (2020-2024)
  • BMW 3 Series G20 (2019-2026)
  • BMW 4 Series G22 / G23 (2021-2026)
  • BMW 4 Series Gran Coupe G26 (2022-2026)
  • BMW 5 Series G30 (2017-2023)
  • BMW 5 Series G60 (2024-2026)
  • BMW 7 Series G12 (2016-2022)
  • BMW 7 Series G70 (2023-2026)
  • BMW 8 Series G14 / G15 (2019-2025)
  • BMW 8 Series Gran Coupe G16 (2020-2025)
  • BMW i3 I01 (2014-2021)
  • BMW i8 I12 (2014-2020)
  • BMW M2 G87 (2023-2027)
  • BMW M3 G80 (2021-2027)
  • BMW M4 G82 / G83 (2021-2027)
  • BMW M5 F90 (2018-2023)
  • BMW M8 F91 / F92 (2020-2025)
  • BMW M8 Gran Coupe F93 (2020-2025)
  • Toyota GR Supra A90 (2020-2026)
  • BMW X1 F48 (2016-2022)
  • BMW X1 U11 (2023-2026)
  • BMW X2 F39 (2018-2023)
  • BMW X3 G01 (2018-2024)
  • BMW X3 M F97 (2020-2024)
  • BMW X4 G02 (2019-2025)
  • BMW X4 M F98 (2020-2024)
  • BMW X5 G05 (2019-2026)
  • BMW X5 M F95 (2020-2026)
  • BMW X6 G06 (2020-2026)
  • BMW X6 M F96 (2020-2026)
  • BMW X7 G07 (2019-2026)
  • BMW Z4 G29 (2019-2026)

Not sure your car or stud kit is a match? Send us your VIN and we will confirm before you order.

Installation Notes

If you can swap a wheel, you can install these. Plan on about an hour per axle. This item is non-returnable, so confirm your spacer size and stud length before you order.

  1. Lift the car, support it on jack stands, and remove the wheels.
  2. Clean the hub face so the spacer sits flat with no rust or debris behind it.
  3. Apply a thin coat of the included Copaslip to the hub face and the hub bolt threads.
  4. Slide the spacer over your studs and secure it to the hub with the included hub bolts.
  5. Mount the wheel and torque your lug nuts to your stud kit maker's spec in a star pattern.
  6. Re-check lug nut torque after the first 50 to 100 miles, and after every track session.