H&R TRAK+ DRA Bolt-On Wheel Spacers 22.5-30mm (Pair) - BMW 5x112 G-Series / M Models & Toyota GR Supra

Sale price $134.96 Regular price $149.95

Black Friday price: $128.21 (applied in cart)

SKU: 4555664

Add To Wishlist

Running high-offset wheels on a BMW or GR Supra, 22.5mm to 30mm per side is often where the wheel finally lines up with the fender. At that width H&R uses its DRA bolt-on design. The spacer bolts to your hub with special bolts H&R includes, and the wheel then mounts to the spacer with your factory wheel bolts.

That means no hunting for extra-long wheel bolts. The DRA keeps the 5x112 bolt pattern and 66.5mm center bore, and it is hubcentric on both the hub and the wheel side. Choose your width and finish above. Each kit is a pair for one axle.

Why H&R TRAK+ DRA Bolt-On Spacers

TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly.

One check before you order: H&R requires your factory wheel bolts to have a fully threaded shank and to be shorter than the spacer is thick, so the bolt tip does not hit the hub face. Measure yours before you order, or send us a photo of a bolt next to a ruler and we will confirm.

What's Included

  • 2 H&R TRAK+ DRA spacers in the width and finish you choose (one axle)
  • Special hub bolts to mount the spacers

Product photo shows a representative H&R TRAK+ DRA spacer. Width, finish and packaging vary by option.

Key Features

  • Widths of 22.5mm, 25mm and 30mm per side
  • Bolt-on design, special hub bolts included
  • Wheel mounts to the spacer with your factory wheel bolts
  • Silver or black finish
  • Fits the 5x112 bolt pattern with a 66.5mm center bore
  • Hubcentric on both the hub and wheel side
  • Made in Germany
  • Sold as a pair. Order two pairs for all four corners.

Vehicle Fitment and Available Widths

The H&R TRAK+ DRA spacers in this listing fit these models:

  • BMW F39 X2 sDrive28i / xDrive28i (2018-2023): 22.5mm, 25mm and 30mm
  • BMW F48 X1 sDrive28i / xDrive28i (2016-2022): 22.5mm, 25mm and 30mm
  • BMW F44 228i xDrive / M235i xDrive Gran Coupe (2020-2024): 22.5mm (rear only), 25mm (rear only) and 30mm (rear only)
  • BMW F74 228i xDrive Gran Coupe (2025-2026): 22.5mm (rear only), 25mm (rear only) and 30mm (rear only)
  • BMW G42 230i Coupe (2022-2024), M240i Coupe (2023-2026), M240i xDrive Coupe (2022-2026): 22.5mm (rear only), 25mm (rear only) and 30mm (rear only)
  • BMW G20 330i / M340i Sedan RWD, M340i xDrive Sedan (2019-2026): 22.5mm, 25mm and 30mm
  • BMW G20 330i xDrive Sedan (2019-2026): 22.5mm, 25mm and 30mm
  • BMW G20 330e / 330e xDrive Sedan (2021-2024): 22.5mm (rear only), 25mm (rear only) and 30mm (rear only)
  • BMW G80 M3 / M3 Competition Sedan (2021-2026), M3 Competition xDrive (2022-2026), M3 CS (2024-2025): 22.5mm, 25mm and 30mm
  • BMW G22 430i / 430i xDrive / M440i / M440i xDrive Coupe (2021-2026): 22.5mm, 25mm and 30mm
  • BMW G23 430i / M440i Convertible RWD (2021-2026): 22.5mm, 25mm and 30mm
  • BMW G23 M440i xDrive Convertible (2022-2026): 22.5mm and 25mm
  • BMW G26 430i Gran Coupe RWD (2022-2026): 22.5mm and 25mm
  • BMW G26 M440i xDrive Gran Coupe (2022-2026): 22.5mm and 25mm
  • BMW G26 i4 eDrive35 (2022-2024), i4 eDrive40 (2022-2025), i4 xDrive40 (2024-2026), i4 M50 (2022-2025), i4 M60 (2026): 22.5mm and 25mm
  • BMW G82 M4 / M4 Competition Coupe (2021-2026), M4 Competition xDrive Coupe (2022-2026), M4 CSL (2023): 22.5mm, 25mm and 30mm
  • BMW G83 M4 Competition xDrive Convertible (2022-2025): 22.5mm, 25mm and 30mm
  • BMW G30 530i / 530i xDrive / 530e / 530e xDrive / 540i / 540i xDrive / M550i xDrive (2017-2023): 22.5mm (rear only), 25mm (rear only) and 30mm (rear only)
  • BMW G60 530i / 530i xDrive / 540i xDrive Sedan (2024-2026), 550e xDrive (2025): 22.5mm, 25mm and 30mm
  • BMW G60 i5 eDrive40 / xDrive40 (2024-2026), i5 M60 (2024-2025): 22.5mm, 25mm and 30mm
  • BMW G32 640i xDrive Gran Turismo (2018-2019): 22.5mm, 25mm and 30mm
  • BMW G11/G12 740i / 740i xDrive / 740e xDrive / 750i / 750i xDrive / M760i xDrive (2016-2019): 22.5mm, 25mm and 30mm
  • BMW G70 i7 eDrive50 / xDrive60 / M70 (2023-2024): 22.5mm, 25mm and 30mm
  • BMW G14 840i xDrive / M850i xDrive Convertible (2019-2026): 22.5mm and 25mm
  • BMW G15 840i xDrive / M850i xDrive Coupe (2019-2026): 22.5mm and 25mm
  • BMW G16 840i / 840i xDrive / M850i xDrive Gran Coupe (2020-2026): 22.5mm and 25mm
  • BMW F91 / F92 / F93 M8 and M8 Competition (2020-2025): 22.5mm and 25mm
  • BMW U11 X1 xDrive28i (2023-2026), X1 M35i (2024-2026): 22.5mm and 25mm
  • BMW U10 X2 xDrive28i / M35i (2024): 22.5mm, 25mm and 30mm
  • BMW U10 X2 M35i xDrive (2024-2026): 22.5mm and 25mm
  • BMW G01 X3 sDrive30i (2018-2020): 22.5mm, 25mm and 30mm
  • BMW G01 X3 xDrive30i / M40i (2018-2024): 22.5mm (rear only), 25mm (rear only) and 30mm (rear only)
  • BMW F97 X3 M / X3 M Competition (2020-2024): 22.5mm and 25mm
  • BMW G02 X4 xDrive30i / M40i (2019-2025): 22.5mm, 25mm and 30mm
  • BMW F98 X4 M / X4 M Competition (2020-2025): 22.5mm and 25mm
  • BMW G05 X5 xDrive40i (2019-2026), xDrive50i (2019-2020), M50i (2019-2023), xDrive45e (2021-2023), xDrive50e (2024-2025), M60i (2024-2026): 22.5mm, 25mm and 30mm
  • BMW F95 X5 M (2020-2025), X5 M Competition (2020-2026): 22.5mm, 25mm and 30mm
  • BMW G06 X6 xDrive40i (2020-2026), M60i (2024-2026): 22.5mm, 25mm and 30mm
  • BMW G06 X6 sDrive40i (2020), M50i (2020-2023): 22.5mm and 25mm
  • BMW F96 X6 M Competition (2020-2026): 22.5mm, 25mm and 30mm
  • BMW G07 X7 (2019-2025): 22.5mm, 25mm and 30mm
  • BMW I20 iX xDrive50 (2022-2025), iX M60 (2023-2025): 22.5mm and 25mm
  • BMW G29 Z4 sDrive30i (2019-2026), sDrive M40i (2020-2026): 22.5mm, 25mm and 30mm
  • Toyota GR Supra 3.0 / 3.0 Premium / Launch Edition (A90, 2020-2025): 22.5mm, 25mm and 30mm

H&R lists these widths for each model. A width marked rear only should not be used on the front axle. Not sure about your car? Send us your VIN and we will confirm before you order.

Installation Notes

A DRA install has two steps at each corner: the spacer bolts to the hub, then the wheel bolts to the spacer. Use a torque wrench for both. Professional installation is recommended.

  1. Clean the hub face and remove any rust or scale so the spacer sits flat.
  2. Bolt the DRA spacer to the hub with the special bolts supplied, tightened to the torque in the H&R instructions.
  3. Check that your factory wheel bolts are fully threaded and shorter than the spacer is thick.
  4. Mount the wheel on the spacer and tighten the factory wheel bolts to factory torque in a star pattern.
  5. Turn the wheel by hand and check that nothing rubs. The wheel should spin freely.
  6. Re-check the torque on the spacer bolts and wheel bolts after the first short drive.