MMX Performance RP650 Fast-Road Rear Brake Pads - BMW F8X M2 / M3 / M4 / F2X / F3X M Sport

Regular price $217.75

Black Friday price: $206.86 (applied in cart)

SKU: MMR27-0501R

Add To Wishlist

Upgrade only the front pads and the rear axle becomes the weak link. Under hard use, a tired factory rear pad changes how the car balances on the brakes.

The MMX RP650 fast-road rear brake pads use the same compound as the RP650 fronts, so the car brakes as one matched system.

RP650 Rear Brake Pads, Matched to the Fronts

RP650 is a medium aramid-fiber compound with a 0.42 friction coefficient across a 450-650 degrees C window. It works from cold with no warm-up, and holds near-zero fade and predictable friction through repeated heavy stops, giving a progressive pedal even when the factory pad would start to give up.

Road Legal and Quiet

The pads are ECE-R90 approved, certified for cold performance, speed, sensitivity, friction behavior, compressibility, shear, and hardness. Shimmed, slotted, and chamfered construction keeps them quiet, and they bed in naturally over the first 100-200 miles.

What's Included

  • (1) Set of 4 rear brake pads, pre-shimmed, for one car

Key Features

  • 0.42 friction coefficient from 450-650 degrees C
  • Full bite from cold, near-zero fade under sustained use
  • ECE-R90 approved
  • Uses the factory caliper and hardware
  • 1-year manufacturer warranty, designed and tested in the UK
  • MMX part number MMR27-0501R

Vehicle Fitment

Fits the following BMW models with factory iron rear brakes:

  • BMW F80 M3 (2015-2018)
  • BMW F82 M4 (2015-2020)
  • BMW F83 M4 Convertible (2015-2020)
  • BMW F87 M2 (2016-2018)
  • BMW F87 M2 Competition (2019-2021)
  • BMW F20 1 Series, F22 / F23 2 Series, F30 / F31 3 Series, and F32 / F33 4 Series with factory M Sport brakes and the N55 or B58 engine

Not for cars with M Carbon ceramic brakes. For 1, 2, 3, and 4 Series cars, confirm your car has the factory M Sport brakes, or send us your VIN.

Installation Notes

The electronic parking brake must be put into service mode before retracting the rear pistons. Brake fluid, lubricant, and fitting accessories are not included.

  1. Put the electronic parking brake into service mode with a scan tool.
  2. Lift the car, remove the rear wheels, and retract the caliper pistons.
  3. Install the RP650 pads with the factory hardware.
  4. Exit service mode, pump the pedal, and bed the pads in over the first 100-200 miles.