MMX Performance N54 Intercooler - BMW E82 135i / 1M / E9X 335i

Regular price $766.20

Black Friday price: $727.89 (applied in cart)

SKU: MMR05-0201

Add To Wishlist

The N54 makes big power with a tune, but the factory intercooler cannot keep up. Even at stock boost it heat soaks under sustained load, intake temperatures climb, and the power falls away run after run.

The MMX N54 intercooler removes that bottleneck.

Bar-and-Plate N54 Intercooler

The bar-and-plate core has 20% more volume than the factory unit and cuts charge air temperature by about 20 degrees C. MMX quotes roughly 20bhp from that alone at standard boost, and the gap grows as you add boost because the bigger core keeps absorbing heat the factory part cannot.

Built to Last

The core is precision TIG welded throughout, with high-flow cast end tanks and an anti-corrosive thermal black finish. OE-style connections mean it goes in in under an hour, with no cutting or fabrication.

What's Included

  • (1) MMX N54 performance intercooler

Key Features

  • 20% larger core volume than OE
  • About 20 degrees C lower charge air temperature
  • Bar-and-plate core, TIG welded throughout
  • High-flow cast end tanks
  • OE-style charge pipe connections
  • 1-year manufacturer warranty, designed and tested in the UK
  • MMX part number MMR05-0201

Vehicle Fitment

Fits the following N54-powered BMW models:

  • BMW E82 / E88 135i, N54 (2008-2010)
  • BMW E82 1M Coupe, N54 (2011-2012)
  • BMW E90 / E91 335i, N54 (2007-2010)
  • BMW E92 / E93 335i, N54 (2007-2010)
  • BMW E92 / E93 335is, N54 (2011-2013)

Intercooler only. Charge pipe and silicone hoses are sold separately. For the E81 / E87 135i, contact us before ordering.

Installation Notes

An under-an-hour job with no cutting or permanent modification. Check local emissions rules before installing intake modifications.

  1. Lift the front of the car and support it safely.
  2. Remove the bumper components needed to reach the intercooler.
  3. Disconnect the charge pipes and remove the factory intercooler.
  4. Fit the MMX intercooler, reconnect the charge pipes, reassemble, and check for boost leaks.