MMX Performance One-Piece 4-Pin High HP Crank Hub Kit - BMW S55 / N55

Regular price $1,064.18

Black Friday price: $1,010.97 (applied in cart)

SKU: MMR20-1004

Add To Wishlist

On a high-horsepower N55 or S55, the factory three-piece crank hub is a gamble. It relies on friction to hold its position, and under big load it can slip, move the timing far enough for piston-to-valve contact, and take the engine with it.

The MMX 4-pin crank hub kit takes friction out of the equation. The hub is mechanically locked to the crankshaft, so it cannot rotate on its own no matter how much boost you run.

4-Pin Crank Hub for High-Horsepower Builds

The one-piece hub is machined from heat-treated billet EN36 steel and located on the crank by four precision-machined dowels. The timing relationship holds regardless of load. This is the version MMX specifies for builds beyond the range of the unpinned one-piece hub.

What This Install Involves

Fitting the dowels means drilling the crankshaft, a permanent modification. The kit includes the drilling jig and drill bit needed to do it accurately, but this is not a home garage job. Choose the version with the MMX capture plate to also lock the crank bolt head so it cannot back out.

What's Included

  • (1) MMX one-piece billet crank hub
  • (4) Precision-machined locating dowels
  • Drilling jig and drill bit
  • MMR20-1004FK only: (1) MMX billet crank hub capture plate (MMR20-1002) with hardware

Key Features

  • Replaces the factory three-piece crank hub
  • Heat-treated billet EN36 steel
  • Four dowels mechanically lock the hub to the crank
  • Built for high-horsepower N55 and S55 builds
  • Drilling jig and bit included
  • MMX part numbers MMR20-1004 (hub) and MMR20-1004FK (hub with capture plate)

Vehicle Fitment

Fits BMW N55 and S55 engines, including these models:

  • BMW F80 M3 (2015-2018), S55
  • BMW F82 M4 (2015-2020), S55
  • BMW F83 M4 Convertible (2015-2020), S55
  • BMW F87 M2 (2016-2018), N55
  • BMW F87 M2 Competition (2019-2021), S55
  • BMW F87 M2 CS (2020-2021), S55

Also fits N55-powered F22 / F23 2 Series, F30 / F31 3 Series, and F32 / F33 4 Series models. Confirm your engine code before ordering.

Installation Notes

Professional installation is required. The crankshaft is permanently modified and the dowel holes must be drilled in exact alignment.

  1. Lock the engine at the correct timing position with the appropriate BMW timing tools.
  2. Remove the front accessories and the factory crank hub assembly.
  3. Mount the supplied jig and drill the crankshaft for the dowels.
  4. Install the dowels and MMX hub, torque the crank bolt to 100Nm plus 270 degrees, and fit the capture plate if supplied.
  5. Confirm timing before starting the engine.