MMX Performance 2-Piece Floating Front Rotor Set 380x30mm - BMW F80 M3 / F82 M4 / F87 M2

Regular price $1,713.63

Black Friday price: $1,627.95 (applied in cart)

SKU: MMR30-1001F

Add To Wishlist

The factory one-piece front discs on an F8X M car look the part, but a few hard laps or a fast canyon run is enough to show their limits. Heat builds, fade creeps in, and warping and judder follow.

The MMX 2-piece floating front rotor set is a direct replacement for your factory iron front discs that runs cooler, weighs less at the hub, and stays consistent lap after lap.

Why 2-Piece Floating Front Rotors

Each 380x30mm high-carbon iron ring mounts to a CNC-machined 6061-T6 aluminum hat through floating bobbins, so the ring can expand radially and axially under heat instead of warping or cracking. The aluminum hat is lighter than the factory part, cutting unsprung and rotating mass where it matters most for steering and ride.

Up to 30% Cooler

72 directionally curved internal vanes pump air through the disc as it spins, so the rotors run up to 30% cooler than OE. That means less fade, more consistent pad release, and longer rotor life. Directional grooves on the face improve initial bite and clear pad gas and debris.

What's Included

  • (1) Left-hand 380x30mm 2-piece floating rotor, bobbins pre-installed
  • (1) Right-hand 380x30mm 2-piece floating rotor, bobbins pre-installed

Key Features

  • 380mm x 30mm, direct replacement for OE iron front discs
  • High-carbon iron ring, 6061-T6 aluminum hat
  • Floating bobbin mounting system
  • 72 directionally curved cooling vanes, up to 30% cooler than OE
  • Directional, left and right specific
  • Works with factory calipers and OE or MMX RP650 pads
  • 1-year manufacturer warranty, designed and tested in the UK
  • MMX part number MMR30-1001F

Vehicle Fitment

Fits the following BMW models with factory iron brakes:

  • BMW F80 M3 (2015-2018)
  • BMW F82 M4 (2015-2020)
  • BMW F83 M4 Convertible (2015-2020)
  • BMW F87 M2 (2016-2018)

Not compatible with the F87 M2 Competition or M2 CS, which use a different front caliper and rotor. Not for cars with M Carbon ceramic brakes. Pads sold separately.

Installation Notes

A straightforward rotor swap with basic tools. The rotors are directional, so check left and right before fitting. New pads and a proper bed-in are recommended.

  1. Lift the car, remove the front wheels, and unbolt the calipers and carriers.
  2. Remove the factory rotors and clean the hub faces.
  3. Install the MMX rotors on the correct sides, then refit the carriers and calipers.
  4. Torque everything to the BMW specification and bed in the pads before hard use.