SAVE $4.05
H&R TRAK+ DR Wheel Spacers 3-20mm (Pair) - BMW F-Series 5x120 (F22, F30, F32, F80 M3, F82 M4, F87 M2)
Black Friday price: $76.91 (applied in cart)
The F30, F32 and F8x M cars leave the factory with the wheels tucked inboard, so even good wheels can look narrow in the arches. H&R TRAK+ DR wheel spacers push the wheels out to fill the fenders, and the wider track adds stability through corners.
DR is H&R's classic spacer design. It sits between the hub and the wheel and keeps the factory 5x120 bolt pattern and 72.5mm center bore. The 13mm and 20mm spacers have their own centering lip, so the wheel stays hubcentric. The 3mm and 5mm spacers are flat discs that use the factory hub to center the wheel. Choose your width and finish above. Each kit is a pair for one axle.
Why H&R TRAK+ Wheel Spacers Instead of Generic Spacers
TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.
DR spacers need longer 14x1.25 wheel bolts, sold separately. Your factory bolts lose thread engagement once a spacer is in place, so plan new bolts into the same order. Tell us your spacer width and wheels and we will help you match the right bolt. Need 10mm, 12mm or 15mm? Send us your VIN and we will confirm the right H&R part.
What's Included
Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.
Key Features
Vehicle Fitment and Available Widths
The H&R TRAK+ DR spacers in this listing fit these models:
H&R lists these widths for each model. Not sure about your car? Send us your VIN and we will confirm before you order.
Installation Notes
DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. On 3mm, 5mm and 13mm spacers, H&R requires you to measure first. The factory hub must still stick out far enough past a 3mm or 5mm spacer to center the wheel, and on the 13mm spacer the hub height and the inner bevel of your wheel must be checked so the wheel seats fully on the spacer.
Width: 3mm, Finish: Silver
The F30, F32 and F8x M cars leave the factory with the wheels tucked inboard, so even good wheels can look narrow in the arches. H&R TRAK+ DR wheel spacers push the wheels out to fill the fenders, and the wider track adds stability through corners.
DR is H&R's classic spacer design. It sits between the hub and the wheel and keeps the factory 5x120 bolt pattern and 72.5mm center bore. The 13mm and 20mm spacers have their own centering lip, so the wheel stays hubcentric. The 3mm and 5mm spacers are flat discs that use the factory hub to center the wheel. Choose your width and finish above. Each kit is a pair for one axle.
Why H&R TRAK+ Wheel Spacers Instead of Generic Spacers
TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.
DR spacers need longer 14x1.25 wheel bolts, sold separately. Your factory bolts lose thread engagement once a spacer is in place, so plan new bolts into the same order. Tell us your spacer width and wheels and we will help you match the right bolt. Need 10mm, 12mm or 15mm? Send us your VIN and we will confirm the right H&R part.
What's Included
Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.
Key Features
Vehicle Fitment and Available Widths
The H&R TRAK+ DR spacers in this listing fit these models:
H&R lists these widths for each model. Not sure about your car? Send us your VIN and we will confirm before you order.
Installation Notes
DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. On 3mm, 5mm and 13mm spacers, H&R requires you to measure first. The factory hub must still stick out far enough past a 3mm or 5mm spacer to center the wheel, and on the 13mm spacer the hub height and the inner bevel of your wheel must be checked so the wheel seats fully on the spacer.
Driven by performance and precision, AutoTecknic has been crafting premium carbon fiber and aerodynamic upgrades since 2000. From our Southern California headquarters, we design and engineer parts that elevate both form and function. Built for drivers who demand more from their machines