Eventuri Black Carbon Intake System - Audi F3 RSQ3

Regular price $1,895.00

Black Friday price: $1,705.50 (applied in cart)

SKU: EVE-RSQ3-CF-INT

Add To Wishlist

The five-cylinder in the RSQ3 wants more air than the factory box can give, especially once the boost goes up. The Eventuri Black Carbon Intake System flows 840 CFM against 530 CFM for stock, with claimed gains of 15-18 hp on the stock turbo and 25-30 hp on a hybrid.

It is a sealed system, so intake temperatures stay low and stable even on a hot day.

How the Eventuri RSQ3 Carbon Intake Works

Eventuri's patented Venturi housing gives the largest internal volume the bay allows, wrapped around a 210mm high-flow dry cone filter. A dual-source carbon inlet duct pulls from the front slam panel and the upper core support, and a 103mm carbon tube curves smoothly into the turbo. It works with the OE and APR throttle bodies.

What's Included

  • Carbon Venturi filter housing (103mm outlet)
  • 210mm OD high-flow dry cone filter
  • Carbon inlet duct with dual air feed
  • Carbon intake tube (103mm ID)
  • OPF breather adapter
  • Gold reflective heat shield
  • Stainless steel mounting brackets, silicone couplers and breather hose

Key Features

  • 100% genuine carbon fiber housing, duct and tube
  • 840 CFM flow vs 530 CFM factory
  • 15-18 hp / 19-23 lb-ft stock turbo, 25-30 hp / 20-24 lb-ft hybrid turbo (claimed)
  • Compatible with OE and APR throttle bodies
  • Replacement filter: EVE-W210-FTR (Type D)
  • Part number: EVE-RSQ3-CF-INT

Vehicle Fitment

Fits the following models:

  • Audi F3 RSQ3 and RSQ3 Sportback (2020-2025, not sold in the US)

Emissions: This intake does not carry a CARB Executive Order. In California and states that follow CARB rules it is sold for racing and off-road use only.

Installation Notes

Bolt-in with hand tools in about two hours.

  1. Remove the factory airbox, inlet duct and intake tube.
  2. Install the brackets, heat shield and Venturi housing with filter.
  3. Fit the carbon inlet duct and intake tube to the turbo.
  4. Connect the breather adapter and tighten all couplers.