Sold out
AutoTecknic Dry Carbon Flip Key Case - Audi R8 (2008-2015) / 8J TT / 4L Q7 / 8P A3 / B7 A4 / C6 A6
Black Friday price: $40.00 (applied in cart)
Your Audi flip key goes everywhere with you, and after a few years the black plastic shows it: scuffed edges, a worn finish, scratches from everything else on the ring. The AutoTecknic Dry Carbon Key Case covers the Audi flip key used on the first-generation R8, 8J TT, 4L Q7, 8P A3, B7 A4 and C6 A6 in real 3K twill carbon fiber.
This is 100% genuine dry carbon fiber with a high-gloss clear coat, not a hydro-dipped pattern or a plastic shell wrapped in carbon film. It adds almost no bulk, protects the factory key, and clips on in about a minute with no tools.
Check your key before you order: compare your key to the photos on this page. This case fits the Audi flip key with a fold-out blade, the lock, unlock and trunk buttons on the front, and the Audi rings on the back. It is made for the 3-button key shown in the photos. Many US keys also have a red panic button. If yours does, or you're not sure which key you have, contact us with your car's year and model before you order and we'll confirm fit. If your key has no fold-out blade and three stacked buttons above a chrome end cap (2008-2018 A4, A5, Q5, A6, A7 and A8), shop our AutoTecknic Dry Carbon Key Case for the Audi smart key instead.
Dry Carbon Audi Flip Key Cover Shaped for the Factory Key
The case is molded around the Audi flip key shell, so it sits tight instead of sliding around like a universal silicone cover. The blade still folds in and out, the release button stays within reach, and the open-face design leaves the buttons uncovered and is built to preserve remote range.
What's Included
Key Features
Vehicle Fitment
Fits US-market Audi models with the flip key shown in the photos:
Not compatible with the Audi smart key, the older key used on the B6 A4 and C5 A6, or the newer keys used on the 2016+ TT, 2017+ Q7, 2017+ R8, 2019+ Q3 and 2022+ A3. Fit is not confirmed for the 2015-2020 A3 or the 2015-2018 Q3, which use a different key shell.
Installation Notes
No tools needed. It takes about a minute.
Vehicle Selection: R8 Gen 1 (2008-2015)
Your Audi flip key goes everywhere with you, and after a few years the black plastic shows it: scuffed edges, a worn finish, scratches from everything else on the ring. The AutoTecknic Dry Carbon Key Case covers the Audi flip key used on the first-generation R8, 8J TT, 4L Q7, 8P A3, B7 A4 and C6 A6 in real 3K twill carbon fiber.
This is 100% genuine dry carbon fiber with a high-gloss clear coat, not a hydro-dipped pattern or a plastic shell wrapped in carbon film. It adds almost no bulk, protects the factory key, and clips on in about a minute with no tools.
Check your key before you order: compare your key to the photos on this page. This case fits the Audi flip key with a fold-out blade, the lock, unlock and trunk buttons on the front, and the Audi rings on the back. It is made for the 3-button key shown in the photos. Many US keys also have a red panic button. If yours does, or you're not sure which key you have, contact us with your car's year and model before you order and we'll confirm fit. If your key has no fold-out blade and three stacked buttons above a chrome end cap (2008-2018 A4, A5, Q5, A6, A7 and A8), shop our AutoTecknic Dry Carbon Key Case for the Audi smart key instead.
Dry Carbon Audi Flip Key Cover Shaped for the Factory Key
The case is molded around the Audi flip key shell, so it sits tight instead of sliding around like a universal silicone cover. The blade still folds in and out, the release button stays within reach, and the open-face design leaves the buttons uncovered and is built to preserve remote range.
What's Included
Key Features
Vehicle Fitment
Fits US-market Audi models with the flip key shown in the photos:
Not compatible with the Audi smart key, the older key used on the B6 A4 and C5 A6, or the newer keys used on the 2016+ TT, 2017+ Q7, 2017+ R8, 2019+ Q3 and 2022+ A3. Fit is not confirmed for the 2015-2020 A3 or the 2015-2018 Q3, which use a different key shell.
Installation Notes
No tools needed. It takes about a minute.
Driven by performance and precision, AutoTecknic has been crafting premium carbon fiber and aerodynamic upgrades since 2000. From our Southern California headquarters, we design and engineer parts that elevate both form and function. Built for drivers who demand more from their machines