{"product_id":"mmx-performance-adjustable-rear-toe-arm-set-bmw-g8x-f8x-m2-m3-m4","title":"MMX Performance Adjustable Rear Toe Arm Set - BMW G8X \/ F8X M2 \/ M3 \/ M4","description":"\u003cp\u003e\u003cbr\u003eYour rear toe setting looks perfect on the alignment rack. Under load on track, it's a different story.\u003c\/p\u003e\n\u003cp\u003eThe factory rear toe arms on the G8X and F8X M-cars use rubber bushings that flex under hard acceleration, braking, and cornering. That flex changes your rear toe geometry in real time, exactly when you need it to stay put. The MMX Performance Adjustable Rear Toe Arm Set fixes that. Machined from billet 6061-T6 aluminum with precision pillow ball rod ends, these direct-replacement arms eliminate bushing deflection and let you dial in rear toe to your exact spec.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Pillow Balls Change Everything\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRubber bushings are designed to absorb NVH. That same compliance lets the arm move when the suspension loads up. Pillow ball rod ends have one job: pivot precisely and nothing else. Your rear toe stays where you set it whether you're tracking the car hard, pushing through an on-ramp, or running a tight autocross course. More consistent geometry means more predictable handling, better tire contact through the whole corner, and tire wear that actually makes sense.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Means You Can Align It Right\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike OEM-fit bearing replacements, the MMX toe arms give you actual adjustability. Running a lowered setup, wider wheels, or want to fine-tune rear toe for track versus street? You have the range to do it. Set them, get a professional alignment, and know your rear geometry is locked in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from billet 6061-T6 aluminum for maximum strength and rigidity\u003c\/li\u003e\n\u003cli\u003ePrecision pillow ball rod ends eliminate factory rubber bushing deflection\u003c\/li\u003e\n\u003cli\u003eAdjustable design allows custom rear toe setting\u003c\/li\u003e\n\u003cli\u003eMaintains consistent rear toe geometry under load\u003c\/li\u003e\n\u003cli\u003eImproves rear-end stability, chassis response, and handling predictability\u003c\/li\u003e\n\u003cli\u003eReduces uneven and premature rear tire wear\u003c\/li\u003e\n\u003cli\u003eProtective rubber boots shield rod ends from moisture and debris\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for factory toe arms\u003c\/li\u003e\n\u003cli\u003eNo cutting, drilling, or permanent modifications required\u003c\/li\u003e\n\u003cli\u003eFully reversible to stock configuration\u003c\/li\u003e\n\u003cli\u003eSKU: MMR55-1609\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits the following BMW M models, including Competition and xDrive variants:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW G87 M2 (2023-2025)\u003c\/li\u003e\n\u003cli\u003eBMW G80 M3 \/ G81 M3 Touring (2021-2025)\u003c\/li\u003e\n\u003cli\u003eBMW G82 M4 Coupe \/ G83 M4 Convertible (2021-2025)\u003c\/li\u003e\n\u003cli\u003eBMW F87 M2 \/ M2 Competition (2016-2021)\u003c\/li\u003e\n\u003cli\u003eBMW F80 M3 (2015-2018)\u003c\/li\u003e\n\u003cli\u003eBMW F82 M4 Coupe \/ F83 M4 Convertible (2015-2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDirect bolt-on replacement for the factory rear toe arms. Professional alignment required after installation.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRaise and safely support the vehicle, then remove the rear wheels\u003c\/li\u003e\n\u003cli\u003eRemove the factory rear toe arm hardware and arm\u003c\/li\u003e\n\u003cli\u003eInstall the MMX toe arm using the factory mounting locations\u003c\/li\u003e\n\u003cli\u003eSet preliminary toe adjustment before torquing fasteners to spec\u003c\/li\u003e\n\u003cli\u003eReinstall wheels and lower the vehicle\u003c\/li\u003e\n\u003cli\u003eTake the vehicle to an alignment shop to finalize rear toe\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNote: Lowering the vehicle reduces the available toe adjustment range and increases minimum rear camber. Factor this into your alignment spec when building a lowered setup. Pairs with the MMX Rear Camber Arm Bearing Set (MMR55-1651) and Rear Toe\/Traction Arm Bearing Set (MMR55-1650) for a complete rear suspension bushing upgrade.\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":51276908757238,"sku":"MMR55-1609","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/mmx-performance-g8x-f8x-adjustab.jpg?v=1784300018","url":"https:\/\/autotecknic.com\/products\/mmx-performance-adjustable-rear-toe-arm-set-bmw-g8x-f8x-m2-m3-m4","provider":"AutoTecknic USA","version":"1.0","type":"link"}