{"product_id":"mmx-performance-3-point-differential-lift-kit-bmw-g80-m3-g82-m4-g87-m2","title":"MMX Performance 3-Point Differential Lift Kit - BMW G80 M3 \/ G82 M4 \/ G87 M2","description":"\u003cp\u003eEvery launch, hard corner exit and upshift in a G80 M3, G82 M4 or G87 M2 tries to move the rear differential, and the factory rubber mounts let it. The \u003ca href=\"\/collections\/mmr-performance\"\u003eMMX Performance\u003c\/a\u003e 3-Point Differential Lift Kit replaces them with a billet aluminum front cradle and a polyurethane rear bush, so the differential stays put and the rear of the car answers the throttle with less slack.\u003c\/p\u003e\n\u003cp\u003eIt also solves a problem every lowered G8X lives with. Drop the car and the rear driveshafts run at a steeper angle, which adds heat and wear at the CV joints. Set the kit to its raised position during install and it lifts the differential 10mm to bring that geometry back. Run it the standard way and it holds the differential at factory height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow the 3-Point Differential Lift Kit Works\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/mmx-performance-g8x-m2-m3-m4-rear-differential-front-cradle-mount-set\"\u003eMMX front differential cradle (MMR55-1604)\u003c\/a\u003e is machined from 6061-T6 billet aluminum and replaces the factory front differential mount. The \u003ca href=\"\/products\/mmx-performance-g8x-m2-m3-m4-rear-differential-raised-poly-bush\"\u003eMMX raised rear differential bush (MMR55-1605)\u003c\/a\u003e uses 80A durometer polyurethane with a two-position center that sets either factory height or +10mm. Both drop into the factory mounting points with no cutting or drilling, and the increase in NVH is minimal, so the car stays easy to live with on the street.\u003c\/p\u003e\n\u003cp\u003eWant more support later? The \u003ca href=\"\/products\/mmx-performance-4-point-differential-lift-kit-bmw-g80-m3-g82-m4-g87-m2\"\u003eMMX 4-Point Differential Lift Kit\u003c\/a\u003e adds the dual differential mount and a second bush, and the \u003ca href=\"\/products\/mmx-performance-ultimate-track-differential-kit-bmw-g80-m3-g82-m4-g87-m2\"\u003eMMX Ultimate Track Differential Kit\u003c\/a\u003e adds a high-capacity baffled sump and output shaft heat shields on top of that.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x MMX front differential lift mount \/ cradle (MMR55-1604)\u003c\/li\u003e\n\u003cli\u003e1 x MMX rear differential raised poly bush (MMR55-1605)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet 6061-T6 aluminum front cradle replaces the rubber-isolated factory mount\u003c\/li\u003e\n\u003cli\u003e80A durometer polyurethane rear bush for a firmer, more controlled connection\u003c\/li\u003e\n\u003cli\u003eInstalls at factory differential height or raised +10mm\u003c\/li\u003e\n\u003cli\u003eRaised position corrects driveshaft angles on lowered cars, reducing heat and wear on OEM or aftermarket axle shafts\u003c\/li\u003e\n\u003cli\u003eDirect fit at the factory mounting points, no modification required\u003c\/li\u003e\n\u003cli\u003eMinimal increase in NVH, suited to street and track use\u003c\/li\u003e\n\u003cli\u003eFits RWD and xDrive models\u003c\/li\u003e\n\u003cli\u003ePart number: MMR55-0001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits the following S58-powered models, RWD and xDrive:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW G80 M3 Sedan (2021-2026)\u003c\/li\u003e\n\u003cli\u003eBMW G82 M4 Coupe (2021-2026)\u003c\/li\u003e\n\u003cli\u003eBMW G83 M4 Convertible (2022-2026)\u003c\/li\u003e\n\u003cli\u003eBMW G87 M2 (2023-2026)\u003c\/li\u003e\n\u003cli\u003eBMW G81 M3 Touring (2023-2026, not sold in the US)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional installation is recommended. The differential has to be supported while the factory mounts come out, and the cradle and rear bush must be set to the same height position.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRaise the car and support the rear differential.\u003c\/li\u003e\n\u003cli\u003eRemove the factory front differential mount and rear differential bush.\u003c\/li\u003e\n\u003cli\u003eChoose factory height or +10mm and set the cradle and rear bush to the same position.\u003c\/li\u003e\n\u003cli\u003eInstall the MMX cradle and bush in the factory mounting locations and torque the hardware to BMW specification.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":52394863034614,"sku":"MMR55-0001","price":1049.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/MMX-Differential-3-Point.jpg?v=1794620414","url":"https:\/\/autotecknic.com\/products\/mmx-performance-3-point-differential-lift-kit-bmw-g80-m3-g82-m4-g87-m2","provider":"AutoTecknic USA","version":"1.0","type":"link"}