{"product_id":"mmx-one-piece-crank-hub-kit-bmw-s55-n55-mmr20-1001","title":"MMX Performance One-Piece Crank Hub Upgrade Kit - BMW S55 \/ N55","description":"\u003cp\u003eThe factory crank hub on the N55 and S55 is a three-piece assembly held in place by friction. Under load it can slip, and when it does, crankshaft timing moves with it. That is one of the best-known weak points on these engines.\u003c\/p\u003e\n\u003cp\u003eThe MMX one-piece crank hub upgrade kit replaces that assembly with a single billet part, so there are no separate friction sections left to slip against each other.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOne-Piece Crank Hub, No Crankshaft Drilling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe hub is CNC machined from billet EN36 steel and heat treated with 0.75mm case hardening for the surface hardness and wear resistance a timing component needs. This unpinned version does not require drilling the crankshaft for dowels, and MMX recommends it for stock through Stage 1 tuned N55 and S55 engines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdd the Capture Plate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the version with the MMX capture plate and the crank bolt head is mechanically locked so it cannot back out under engine vibration. For builds past Stage 1, MMX recommends the 4-pin crank hub kit instead.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) MMX one-piece billet crank hub\u003c\/li\u003e\n  \u003cli\u003e(1) New crank bolt\u003c\/li\u003e\n  \u003cli\u003eMMR20-1003FK only: (1) MMX billet crank hub capture plate with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces the factory three-piece crank hub\u003c\/li\u003e\n  \u003cli\u003eCNC-machined billet EN36 steel, 0.75mm case hardened\u003c\/li\u003e\n  \u003cli\u003eUnpinned, no crankshaft drilling required\u003c\/li\u003e\n  \u003cli\u003eRecommended for stock through Stage 1 tuned engines\u003c\/li\u003e\n  \u003cli\u003eAvailable with or without the capture plate\u003c\/li\u003e\n  \u003cli\u003eMMX part numbers MMR20-1001 (hub) and MMR20-1003FK (hub with capture plate)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits BMW N55 and S55 engines, including these models:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW F80 M3 (2015-2018), S55\u003c\/li\u003e\n  \u003cli\u003eBMW F82 M4 (2015-2020), S55\u003c\/li\u003e\n  \u003cli\u003eBMW F83 M4 Convertible (2015-2020), S55\u003c\/li\u003e\n  \u003cli\u003eBMW F87 M2 (2016-2018), N55\u003c\/li\u003e\n  \u003cli\u003eBMW F87 M2 Competition (2019-2021), S55\u003c\/li\u003e\n  \u003cli\u003eBMW F87 M2 CS (2020-2021), S55\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso fits N55-powered F20 \/ F21 M135i, F22 \/ F23 M235i, F30 \/ F31 3 Series, F32 \/ F33 4 Series, and F36 4 Series Gran Coupe models. Confirm your engine code before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional installation is required. This is a critical engine timing component and must be installed with the engine locked at the correct timing position using the proper crank bolt torque procedure.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLock the engine at the correct timing position with the appropriate BMW timing tools.\u003c\/li\u003e\n  \u003cli\u003eRemove the front accessories and the factory crank hub assembly.\u003c\/li\u003e\n  \u003cli\u003eInstall the MMX one-piece hub with the new crank bolt, torqued to 100Nm plus 270 degrees.\u003c\/li\u003e\n  \u003cli\u003eFit the capture plate if supplied, then confirm timing before starting the engine.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"MMX Performance","offers":[{"title":"Without Capture Plate (MMR20-1001)","offer_id":48909198622966,"sku":"MMR20-1001","price":730.46,"currency_code":"USD","in_stock":true},{"title":"With Capture Plate (MMR20-1003FK)","offer_id":48909198655734,"sku":"MMR20-1003FK","price":849.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/52547629038_f1bdf3614f_b_1024x1024_4261aeb2-95d1-40fd-935f-cd8f61a23035.jpg?v=1675614103","url":"https:\/\/autotecknic.com\/products\/mmx-one-piece-crank-hub-kit-bmw-s55-n55-mmr20-1001","provider":"AutoTecknic USA","version":"1.0","type":"link"}