{"product_id":"mmx-4-pin-crank-hub-kit-bmw-s55-n55-mmr20-1004","title":"MMX Performance One-Piece 4-Pin High HP Crank Hub Kit - BMW S55 \/ N55","description":"\u003cp\u003eOn a high-horsepower N55 or S55, the factory three-piece crank hub is a gamble. It relies on friction to hold its position, and under big load it can slip, move the timing far enough for piston-to-valve contact, and take the engine with it.\u003c\/p\u003e\n\u003cp\u003eThe MMX 4-pin crank hub kit takes friction out of the equation. The hub is mechanically locked to the crankshaft, so it cannot rotate on its own no matter how much boost you run.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4-Pin Crank Hub for High-Horsepower Builds\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe one-piece hub is machined from heat-treated billet EN36 steel and located on the crank by four precision-machined dowels. The timing relationship holds regardless of load. This is the version MMX specifies for builds beyond the range of the unpinned one-piece hub.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat This Install Involves\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitting the dowels means drilling the crankshaft, a permanent modification. The kit includes the drilling jig and drill bit needed to do it accurately, but this is not a home garage job. Choose the version with the MMX capture plate to also lock the crank bolt head so it cannot back out.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) MMX one-piece billet crank hub\u003c\/li\u003e\n  \u003cli\u003e(4) Precision-machined locating dowels\u003c\/li\u003e\n  \u003cli\u003eDrilling jig and drill bit\u003c\/li\u003e\n  \u003cli\u003eMMR20-1004FK only: (1) MMX billet crank hub capture plate (MMR20-1002) with hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces the factory three-piece crank hub\u003c\/li\u003e\n  \u003cli\u003eHeat-treated billet EN36 steel\u003c\/li\u003e\n  \u003cli\u003eFour dowels mechanically lock the hub to the crank\u003c\/li\u003e\n  \u003cli\u003eBuilt for high-horsepower N55 and S55 builds\u003c\/li\u003e\n  \u003cli\u003eDrilling jig and bit included\u003c\/li\u003e\n  \u003cli\u003eMMX part numbers MMR20-1004 (hub) and MMR20-1004FK (hub with capture plate)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits BMW N55 and S55 engines, including these models:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW F80 M3 (2015-2018), S55\u003c\/li\u003e\n  \u003cli\u003eBMW F82 M4 (2015-2020), S55\u003c\/li\u003e\n  \u003cli\u003eBMW F83 M4 Convertible (2015-2020), S55\u003c\/li\u003e\n  \u003cli\u003eBMW F87 M2 (2016-2018), N55\u003c\/li\u003e\n  \u003cli\u003eBMW F87 M2 Competition (2019-2021), S55\u003c\/li\u003e\n  \u003cli\u003eBMW F87 M2 CS (2020-2021), S55\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso fits N55-powered F22 \/ F23 2 Series, F30 \/ F31 3 Series, and F32 \/ F33 4 Series models. Confirm your engine code before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional installation is required. The crankshaft is permanently modified and the dowel holes must be drilled in exact alignment.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLock the engine at the correct timing position with the appropriate BMW timing tools.\u003c\/li\u003e\n  \u003cli\u003eRemove the front accessories and the factory crank hub assembly.\u003c\/li\u003e\n  \u003cli\u003eMount the supplied jig and drill the crankshaft for the dowels.\u003c\/li\u003e\n  \u003cli\u003eInstall the dowels and MMX hub, torque the crank bolt to 100Nm plus 270 degrees, and fit the capture plate if supplied.\u003c\/li\u003e\n  \u003cli\u003eConfirm timing before starting the engine.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"MMX Performance","offers":[{"title":"Without Capture Plate","offer_id":48957452288246,"sku":"MMR20-1004","price":1064.18,"currency_code":"USD","in_stock":true},{"title":"With Capture Plate (MMR20-1002)","offer_id":48957452321014,"sku":"MMR20-1004FK","price":1227.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/MMX-CrankHub-Pinned-Plate_1024x1_e0ed87b2-061f-4191-b9e7-0ce5691ab39e.jpg?v=1755203087","url":"https:\/\/autotecknic.com\/products\/mmx-4-pin-crank-hub-kit-bmw-s55-n55-mmr20-1004","provider":"AutoTecknic USA","version":"1.0","type":"link"}