{"product_id":"hr-trak-dra-bolt-on-wheel-spacers-bmw-e70-x5-e71-x6-5x120-74-25mm-30mm","title":"H\u0026R TRAK+ DRA Bolt-On Wheel Spacers 25-30mm (Pair) - BMW E70 X5 \/ E71 X6 5x120 74mm","description":"\u003cp\u003eBig offset changes on an E70 X5 call for a spacer that does more than fill a gap. At 25mm and 30mm per side, H\u0026amp;R uses its DRA bolt-on design. The spacer bolts to your hub with special bolts H\u0026amp;R includes, and the wheel then mounts to the spacer with your factory wheel bolts.\u003c\/p\u003e\n\u003cp\u003eThat means no hunting for extra-long wheel bolts. The DRA keeps the 5x120 bolt pattern and the E70's 74mm center bore, and it is hubcentric on both the hub and the wheel side. Choose your width and finish above. Each kit is a pair for one axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy H\u0026amp;R TRAK+ DRA Bolt-On Spacers on the E70 X5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTRAK+ spacers are made from a proprietary alloy that H\u0026amp;R developed for them. H\u0026amp;R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.\u003c\/p\u003e\n\u003cp\u003eCheck your factory wheel bolts before you order. They thread into the spacer, so they must not be so long that the tip reaches the hub face. Measure yours, or send us a photo of a bolt next to a ruler and we will confirm. Need 5mm to 20mm? Those use H\u0026amp;R's DR design, listed separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 H\u0026amp;R TRAK+ DRA spacers in the width and finish you choose (one axle)\u003c\/li\u003e\n\u003cli\u003eSpecial hub bolts to mount the spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct photo shows a representative H\u0026amp;R TRAK+ DRA spacer. Width, finish and packaging vary by option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidths of 25mm and 30mm per side\u003c\/li\u003e\n\u003cli\u003eBolt-on design, special hub bolts included\u003c\/li\u003e\n\u003cli\u003eWheel mounts to the spacer with your factory wheel bolts\u003c\/li\u003e\n\u003cli\u003eSilver or black finish\u003c\/li\u003e\n\u003cli\u003eFits the 5x120 bolt pattern with a 74mm center bore\u003c\/li\u003e\n\u003cli\u003eHubcentric on both the hub and wheel side\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003cli\u003eSold as a pair. Order two pairs for all four corners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment and Available Widths\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe H\u0026amp;R TRAK+ DRA spacers in this listing fit these models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW E70 X5 3.0si \/ 4.8i \/ xDrive30i \/ xDrive35i \/ xDrive35d \/ xDrive48i \/ xDrive50i (2007-2013): 25mm and 30mm, front and rear\u003c\/li\u003e\n\u003cli\u003eBMW E71 X6 xDrive35i \/ xDrive50i (2008-2014): 25mm and 30mm, front only\u003c\/li\u003e\n\u003cli\u003eBMW E70 X5 M (2010-2013) and E71 X6 M (2010-2014): 25mm and 30mm, front only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe E71 X6, the E70 X5 M and the E71 X6 M use these 74mm spacers on the front axle only. Their rear hubs take a different H\u0026amp;R spacer, so send us your VIN and we will confirm the rear part before you order. H\u0026amp;R lists these widths for each model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA DRA install has two steps at each corner: the spacer bolts to the hub, then the wheel bolts to the spacer. Use a torque wrench for both. Professional installation is recommended. At these widths, check fender and suspension clearance with your exact wheel and tire before you drive.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean the hub face and remove any rust or scale so the spacer sits flat.\u003c\/li\u003e\n\u003cli\u003eBolt the DRA spacer to the hub with the special bolts supplied, tightened to the torque in the H\u0026amp;R instructions.\u003c\/li\u003e\n\u003cli\u003eCheck that your factory wheel bolts are not long enough to reach the hub face once threaded into the spacer.\u003c\/li\u003e\n\u003cli\u003eMount the wheel on the spacer and tighten the factory wheel bolts to factory torque in a star pattern.\u003c\/li\u003e\n\u003cli\u003eTurn the wheel by hand and check that nothing rubs. The wheel should spin freely.\u003c\/li\u003e\n\u003cli\u003eRe-check the torque on the spacer bolts and wheel bolts after the first short drive.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"H\u0026R","offers":[{"title":"25mm \/ Silver","offer_id":52466689605878,"sku":"50757404","price":170.96,"currency_code":"USD","in_stock":true},{"title":"25mm \/ Black","offer_id":52466689638646,"sku":"50757404SW","price":170.96,"currency_code":"USD","in_stock":true},{"title":"30mm \/ Silver","offer_id":52466689671414,"sku":"60757404","price":188.96,"currency_code":"USD","in_stock":true},{"title":"30mm \/ Black","offer_id":52466689704182,"sku":"60757404SW","price":188.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/DRA-25mm-1_7c1f9bff-6c0e-4437-90e1-a21c373dcf4a.jpg?v=1795240096","url":"https:\/\/autotecknic.com\/products\/hr-trak-dra-bolt-on-wheel-spacers-bmw-e70-x5-e71-x6-5x120-74-25mm-30mm","provider":"AutoTecknic USA","version":"1.0","type":"link"}