{"product_id":"eventuri-bmw-g20-m340i-b58-carbon-intake-system-pre-nov-2018","title":"Eventuri Carbon Intake System - BMW G20 M340i B58 (Pre-Nov 2018 MAF Sensor)","description":"\u003cp\u003eThe earliest G20 M340i owners got the short end of the stick from the factory. BMW's OE airbox was engineered for packaging and NVH, not performance. On the B58-powered 3 Series it sits close enough to the exhaust manifold that heat soak becomes a real problem under sustained load. If your G20 was built before November 2018 and still has the MAF airflow sensor in the airbox, this is the intake designed specifically for your car.\u003c\/p\u003e\n\n\u003cp\u003eOne critical detail before ordering: verify your production date, not your model year. BMW updated the B58 intake system mid-production in cars built after November 2018, replacing the MAF airflow sensor with a temperature sensor in the inlet tube. The V1 intake fits pre-November 2018 production cars with the MAF sensor configuration only. Check your door jamb sticker before placing your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow It Works\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEventuri's design starts with a fully sealed pre-preg carbon fiber airbox that isolates the filter from radiant engine bay heat. Rather than relying on a single cold-air duct, the system taps two independent feeds: a primary duct from the front of the engine bay and a secondary scoop that extends into the wheel arch area, increasing available air volume without pulling in heat-soaked air. A gold reflective heat shield on the exhaust manifold side actively deflects radiant heat from the airbox assembly.\u003c\/p\u003e\n\n\u003cp\u003eFrom the filter, airflow moves through a smooth-bore carbon fiber inlet tube starting at 111mm ID, replacing the factory convoluted plastic tract. The smooth continuous bore reduces turbulence and pressure drop before air reaches the turbo inlet. Eventuri's patented Venturi housing geometry promotes laminar flow conditions through the assembly, reducing drag on the turbocharger and improving throttle response.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-preg carbon fiber sealed airbox\u003c\/li\u003e\n  \u003cli\u003ePre-preg carbon fiber inlet tube (111mm ID, MAF sensor port)\u003c\/li\u003e\n  \u003cli\u003eBespoke high-flow dry cone air filter\u003c\/li\u003e\n  \u003cli\u003eGold reflective heat shield\u003c\/li\u003e\n  \u003cli\u003eCNC-machined breather adapters\u003c\/li\u003e\n  \u003cli\u003eLaser-cut stainless steel mounting brackets\u003c\/li\u003e\n  \u003cli\u003eSilicone reducer with OEM-spec clamps\u003c\/li\u003e\n  \u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% genuine pre-preg carbon fiber construction on airbox and inlet tube\u003c\/li\u003e\n  \u003cli\u003eFully sealed airbox isolates filter from radiant engine bay heat\u003c\/li\u003e\n  \u003cli\u003eDual cold-air feed: primary engine bay duct plus secondary wheel arch scoop\u003c\/li\u003e\n  \u003cli\u003e111mm ID smooth-bore carbon inlet tube with MAF sensor port for pre-November 2018 B58 configuration\u003c\/li\u003e\n  \u003cli\u003ePatented Venturi housing promotes laminar flow and reduces turbulence at the turbo inlet\u003c\/li\u003e\n  \u003cli\u003eHigh-flow dry cone filter with greater surface area than OEM configuration\u003c\/li\u003e\n  \u003cli\u003eGold reflective heat shield minimizes radiant heat transfer from exhaust manifold\u003c\/li\u003e\n  \u003cli\u003eCNC-machined breather adapters and laser-cut stainless brackets for OEM-level integration\u003c\/li\u003e\n  \u003cli\u003eNo permanent modification required. Uses OEM mounting points.\u003c\/li\u003e\n  \u003cli\u003eDesigned and engineered in the UK by Eventuri\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits BMW G20 M340i with B58 engine produced before November 2018 only:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW 3 Series \/ G20 M340i (2019 Early Production): RWD and xDrive. Production date before November 2018 required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot compatible with G20 M340i built after November 2018. Those vehicles use the V2 intake. Verify your car's production date on the door jamb sticker before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo permanent modification required. Installs using OEM mounting points. Confirm your production date on the door jamb sticker before starting. The MAF sensor port in the V1 inlet tube must match your existing airbox configuration.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eRemove factory airbox and intake tract\u003c\/li\u003e\n  \u003cli\u003eInstall CNC-machined breather adapters at existing factory locations\u003c\/li\u003e\n  \u003cli\u003ePosition carbon airbox using OEM mounting points and laser-cut stainless brackets\u003c\/li\u003e\n  \u003cli\u003eConnect carbon inlet tube to turbo inlet and transfer MAF sensor from factory tube\u003c\/li\u003e\n  \u003cli\u003eRoute both cold-air feeds and fit gold heat shield\u003c\/li\u003e\n  \u003cli\u003eConfirm all sensor connections are secure before starting the engine\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":43277567066358,"sku":"EVE-G20B58-V1-INT","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/G20-B58-1_1024x1024_1dd371e8-7fa3-4514-b82c-59487518a548.jpg?v=1650784792","url":"https:\/\/autotecknic.com\/products\/eventuri-bmw-g20-m340i-b58-carbon-intake-system-pre-nov-2018","provider":"AutoTecknic USA","version":"1.0","type":"link"}