{"product_id":"dinan-red-ignition-coil-n2-series-bmw-n63tu3-s63tu4-s68","title":"Dinan Red N2 Series Style Ignition Coil, Single - BMW N63TU3 \/ S63TU4 \/ S68 V8","description":"\u003cp\u003eA BMW twin-turbo V8 asks a lot of its ignition. Eight cylinders, two turbos and high cylinder pressure every time you lean on it. When a factory coil starts to fade, you feel it as a stumble at part throttle, a misfire code, or a flat spot right when the boost comes in.\u003c\/p\u003e\n\u003cp\u003eThe Dinan Red Ignition Coil is a direct plug-and-play replacement for the factory N2 series coil on BMW N63TU3, S63TU4 and S68 V8 engines. Dinan rates it at up to 10% more energy output than stock for a stronger, more consistent spark, and finishes it in a bold red housing that shows the upgrade the moment the engine cover comes off.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy Upgrade to a Dinan Ignition Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoils are a wear item on any turbo V8, so most owners replace them sooner or later. If you are replacing them anyway, the Dinan coil gives you up to 10% more energy output than stock in the same location, with the same connector and the same mounting points. It follows the factory N2 series pattern, cross-referenced to BMW part 12138692611, so there is no wiring, no adapters and no guesswork at install.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCheck Your Engine Before You Order\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot every S63TU4 car uses this coil. The F9x X5 M and X6 M use the N2 series coil and are covered here. The F9x M5 and M8 use the earlier N series coil and need a different part. The quickest check is to compare the part number on one of your factory coils to BMW 12138692611, or send AutoTecknic your VIN and we will confirm it before you order.\u003c\/p\u003e\n\u003cp\u003eEach listing is one coil. A V8 uses eight, so order eight for a complete set. Dinan lists this coil as not legal for sale or use in the State of California. CARB testing for 50-state compliance is pending, and no CARB Executive Order number has been issued. Dinan part number D650-0011. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Dinan N2 series style ignition coil, red housing\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 10% more energy output than the factory coil, per Dinan\u003c\/li\u003e\n  \u003cli\u003eStronger, more consistent spark\u003c\/li\u003e\n  \u003cli\u003eDirect plug-and-play replacement for the factory N2 series coil\u003c\/li\u003e\n  \u003cli\u003eCross-references BMW OEM part 12138692611\u003c\/li\u003e\n  \u003cli\u003eFemale connector, 3 terminals, same as the factory coil\u003c\/li\u003e\n  \u003cli\u003eBold red housing\u003c\/li\u003e\n  \u003cli\u003eDinan 1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits BMW 4.4L twin-turbo V8 engines that use the N2 series ignition coil:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW N63TU3 V8\u003c\/li\u003e\n  \u003cli\u003eBMW S63TU4 V8 (F9x X5 M and X6 M only)\u003c\/li\u003e\n  \u003cli\u003eBMW S68 V8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot compatible: F9x M5 and M8 with the S63TU4. These cars use the N series coil.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a straightforward swap with basic hand tools. Work on a cold engine, change one coil at a time so the connectors never get mixed up, and replace all eight at once for even spark across both banks.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLet the engine cool completely and remove the engine covers to reach the coils.\u003c\/li\u003e\n  \u003cli\u003eUnplug the connector on the first factory coil and remove the coil from the spark plug well.\u003c\/li\u003e\n  \u003cli\u003eInstall the Dinan coil in the same well and secure it with the supplied hardware.\u003c\/li\u003e\n  \u003cli\u003eReconnect the factory connector until it clicks.\u003c\/li\u003e\n  \u003cli\u003eRepeat for the remaining cylinders, refit the covers, then start the engine and confirm a smooth idle with no warning lights.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268697817334,"sku":"DNND650-0011","price":36.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/5b324127f2c5dcac3495cf7edf727398L.jpg?v=1784135548","url":"https:\/\/autotecknic.com\/products\/dinan-red-ignition-coil-n2-series-bmw-n63tu3-s63tu4-s68","provider":"AutoTecknic USA","version":"1.0","type":"link"}