{"product_id":"dinan-matte-carbon-fiber-cold-air-intake-bmw-g87-m2-g80-m3-g82-m4","title":"Dinan Matte Carbon Fiber Cold Air Intake - BMW G87 M2 \/ G80 M3 \/ G82 M4 (2021-2026)","description":"\u003cp\u003eNot every build wants a mirror finish under the hood. If your M car runs satin wheels, frozen paint or matte carbon trim, a high-gloss intake can look out of place. The S58 still deserves better than the two plastic airboxes it left the factory with. This is the version for owners who want the performance and a quieter look.\u003c\/p\u003e\n\u003cp\u003eThe Dinan Matte Carbon Fiber Cold Air Intake replaces the split factory intake on the BMW G87 M2, G80 M3 and G82\/G83 M4 with a single shared plenum and enlarged airboxes, finished in satin matte 2x2 twill carbon fiber. On Dinan's flow bench it moves 916 CFM against 815 CFM for the stock system at 28 in. H2O, a Dinan-tested 12% airflow gain.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow the Dinan Matte Carbon Fiber Cold Air Intake Flows More\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory S58 intake feeds each turbo through its own separate duct. Dinan joins both into one center plenum with 50% more internal volume, feeding airboxes that are 26% larger than stock. Each airbox carries a cotton filter with 11% more filter area. The semi-open design adds secondary inlets, and Dinan reports the airflow gain comes without raising inlet temperatures. The layout sits symmetrically across the bay and simplifies the plumbing compared to the stock setup.\u003c\/p\u003e\n\u003cp\u003eThis is 100% genuine carbon fiber, not a vinyl wrap or hydro-dipped plastic. The matte clear keeps the 2x2 weave visible without the glare, so it reads as a factory-grade part in a satin-themed engine bay.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDinan Matte Carbon Fiber Cold Air Intake Install and Legal Status\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo cutting, no drilling. It is a bolt-on part with roughly 1.5 hours of labor, and it works on stock or already-modified cars. Before you order, know this: it is legal under EPA's Tampering Policy dated November 23, 2020, but it is not legal for sale or use in the State of California. CARB testing is pending and no Executive Order number has been issued. Dinan part number D760-0063-B. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatte 2x2 twill carbon fiber shared center plenum\u003c\/li\u003e\n  \u003cli\u003eTwo enlarged airboxes, 26% larger than stock\u003c\/li\u003e\n  \u003cli\u003eTwo cotton performance air filters\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDinan-tested 12% more airflow: 916 CFM vs 815 CFM stock at 28 in. H2O\u003c\/li\u003e\n  \u003cli\u003eSingle shared plenum with 50% more volume than the factory separated ducting\u003c\/li\u003e\n  \u003cli\u003eAirboxes 26% larger than stock\u003c\/li\u003e\n  \u003cli\u003eCotton filters with 11% more filter area than stock\u003c\/li\u003e\n  \u003cli\u003eReal 2x2 twill carbon fiber with a satin matte finish, not a wrap or overlay\u003c\/li\u003e\n  \u003cli\u003eSymmetrical engine bay layout\u003c\/li\u003e\n  \u003cli\u003eBolt-on install, about 1.5 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits the following S58-powered BMW M models:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW M2 \/ G87 Coupe (2023-2026): M2\u003c\/li\u003e\n  \u003cli\u003eBMW M3 \/ G80 Sedan (2021-2026): M3, M3 Competition, M3 Competition xDrive\u003c\/li\u003e\n  \u003cli\u003eBMW M4 \/ G82 Coupe (2021-2026): M4, M4 Competition, M4 Competition xDrive\u003c\/li\u003e\n  \u003cli\u003eBMW M4 \/ G83 Convertible (2022-2026): M4 Competition xDrive Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExclusion: the factory strut brace on the M3 CS and M4 CSL is not compatible with this intake.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA confident DIYer with basic hand tools can do this in an afternoon, and any shop familiar with G8X M cars will have it done in about 1.5 hours. Work on a cool engine and follow the Dinan instructions included with the kit.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLet the engine cool completely and remove the engine bay covers and factory strut brace as directed in the instructions.\u003c\/li\u003e\n  \u003cli\u003eLoosen the clamps and remove both factory airboxes and intake ducts.\u003c\/li\u003e\n  \u003cli\u003eInstall the Dinan airboxes and cotton filters in the factory locations.\u003c\/li\u003e\n  \u003cli\u003eFit the carbon fiber center plenum and secure every coupler and clamp with the supplied hardware.\u003c\/li\u003e\n  \u003cli\u003eReinstall the strut brace and covers, then start the engine and check that all connections are tight with no warning lights.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268706468086,"sku":"DNND760-0063-B","price":1663.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/c20ff7a25aeb7a5280dee77943ade6bbL.jpg?v=1784135635","url":"https:\/\/autotecknic.com\/products\/dinan-matte-carbon-fiber-cold-air-intake-bmw-g87-m2-g80-m3-g82-m4","provider":"AutoTecknic USA","version":"1.0","type":"link"}