{"product_id":"dinan-gloss-carbon-fiber-strut-tower-brace-bmw-g87-m2-g80-m3-g82-m4","title":"Dinan Gloss Carbon Fiber Strut Tower Brace - BMW G87 M2 \/ G80 M3 \/ G82 M4 (2021-2026)","description":"\u003cp\u003eYou notice it on a fast sweeper. Turn in, load the front, and the car takes a split second to settle before it commits. On the S58 M cars, the factory answer is a two-piece steel bar across the engine bay. It does the job. It is also heavy, and it is the first thing you see when you open the hood.\u003c\/p\u003e\n\u003cp\u003eThe Dinan Gloss Carbon Fiber Strut Tower Brace replaces that two-piece setup on the BMW G87 M2, G80 M3 and G82\/G83 M4 with one unified brace. It weighs 2.8 lbs against 8.4 lbs for the stock steel bars. That's 5.6 lbs off the front of the car, sitting high in the chassis, where you notice it most.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy the Dinan Carbon Fiber Strut Tower Brace Is Worth It\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne continuous span ties both strut towers together, so the front end stays locked in under hard cornering and steering response is sharper and more consistent from corner to corner. Inset aluminum mounting points carry the load into the towers, while the carbon spans the gap.\u003c\/p\u003e\n\u003cp\u003eThis is 100% genuine 2x2 twill carbon fiber in a gloss finish, not a steel bar with a carbon-look wrap. It was designed to line up with the Dinan gloss carbon fiber cold air intake for a matched, unified engine bay, and it works just as well with the factory intake.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDinan Carbon Fiber Strut Tower Brace Install\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis might be the easiest upgrade you ever make to an M car. It bolts on with the factory mounting hardware and takes about 15 minutes. No cutting, no drilling, no coding. Dinan part number D180-0015. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDinan gloss carbon fiber strut tower brace with inset aluminum mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.8 lbs vs 8.4 lbs for the OEM steel bars, 5.6 lbs lighter\u003c\/li\u003e\n  \u003cli\u003eOne-piece design replaces the factory two-piece strut bar\u003c\/li\u003e\n  \u003cli\u003eReal 2x2 twill carbon fiber in gloss, not a wrap or overlay\u003c\/li\u003e\n  \u003cli\u003eInset aluminum mounting points\u003c\/li\u003e\n  \u003cli\u003eSharper, more consistent front-end response\u003c\/li\u003e\n  \u003cli\u003eMatches the Dinan gloss carbon fiber cold air intake, also works with the stock intake\u003c\/li\u003e\n  \u003cli\u003eBolt-on with factory hardware, about 15 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits the following S58-powered BMW M models:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW M2 \/ G87 Coupe (2023-2026): M2\u003c\/li\u003e\n  \u003cli\u003eBMW M3 \/ G80 Sedan (2021-2026): M3, M3 Competition, M3 Competition xDrive\u003c\/li\u003e\n  \u003cli\u003eBMW M4 \/ G82 Coupe (2021-2026): M4, M4 Competition, M4 Competition xDrive\u003c\/li\u003e\n  \u003cli\u003eBMW M4 \/ G83 Convertible (2022-2026): M4 Competition xDrive Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eM3 CS and M4 CSL fitment is not confirmed. Those cars come with a factory carbon strut brace. Contact us before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA true 15-minute bolt-on that anyone with a socket set and a torque wrench can do in the driveway. No lift needed.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eOpen the hood and remove the factory two-piece strut brace, keeping the mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eSet the Dinan brace in place over the strut towers.\u003c\/li\u003e\n  \u003cli\u003eInstall the factory mounting hardware and torque to factory specification.\u003c\/li\u003e\n  \u003cli\u003eCheck the brace clears the intake and hood, then close the hood.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686250230,"sku":"DNND180-0015","price":1053.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/107e3c8e2ade7e6f8a807498ddb7668dL.jpg?v=1784135415","url":"https:\/\/autotecknic.com\/products\/dinan-gloss-carbon-fiber-strut-tower-brace-bmw-g87-m2-g80-m3-g82-m4","provider":"AutoTecknic USA","version":"1.0","type":"link"}