{"product_id":"dinan-carbon-intake-replacement-air-filter-bmw-f85-x5m-f86-x6m","title":"Dinan Replacement Air Filter for Carbon Fiber Intake - BMW F85 X5M (2015-2018) \/ F86 X6M (2015-2019)","description":"\u003cp\u003eThe Dinan carbon fiber intake on your F85 X5M or F86 X6M works because of its filters. They are much bigger than stock and pull air from their whole surface. When they are loaded with dirt, that advantage is gone. Fresh filters put the system back to flowing the way Dinan designed it.\u003c\/p\u003e\n\u003cp\u003eThis is the genuine Dinan Replacement Air Filter for the Dinan carbon fiber intake on the BMW F85 X5M and F86 X6M. Each Dinan filter offers 146.2 sq in of filter area, compared with 44.5 sq in for a stock filter, and uses deep-pleated multi-layer cotton for flow and filtration. Choose a left filter, a right filter, or the pair.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTwo Filters Per Intake: Choose Left, Right, or the Pair\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dinan carbon fiber intake runs two filters, one per bank. They are different parts: the left side is Dinan D401-0024 and the right side is Dinan D401-0023. Dinan sells each one individually, so pick the side you need from the Side menu, or choose Pair to get one left and one right filter in a single order. Dinan recommends replacing both filters at the same time so the two banks flow evenly. If you are doing scheduled maintenance, the Pair is the simple choice. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy Use a Genuine Dinan Replacement Filter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dinan filter is shaped to fit the oval openings in the factory airbox under the Dinan carbon lid, with rubber blocks that locate it correctly. A steel wire mesh supports the cotton media so it keeps its shape and resists dents. A generic filter will not match that fit, and a poor seal lets unfiltered air reach the turbos.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLeft: one Dinan replacement air filter, left side (D401-0024)\u003c\/li\u003e\n  \u003cli\u003eRight: one Dinan replacement air filter, right side (D401-0023)\u003c\/li\u003e\n  \u003cli\u003ePair: one left filter (D401-0024) and one right filter (D401-0023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGenuine Dinan replacement filters for the Dinan carbon fiber intake D760-0047\u003c\/li\u003e\n  \u003cli\u003e146.2 sq in of filter area per filter vs 44.5 sq in for a stock filter\u003c\/li\u003e\n  \u003cli\u003eDraws air from the full filter surface\u003c\/li\u003e\n  \u003cli\u003eDeep-pleated multi-layer cotton media\u003c\/li\u003e\n  \u003cli\u003eSteel wire mesh for strength and dent resistance\u003c\/li\u003e\n  \u003cli\u003eAvailable as a single left filter, a single right filter, or a left and right pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits only vehicles equipped with the Dinan carbon fiber cold air intake D760-0047:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW X5M \/ F85 (2015-2018): X5M\u003c\/li\u003e\n  \u003cli\u003eBMW X6M \/ F86 (2015-2019): X6M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese filters do not fit a factory intake setup and do not replace the stock BMW air filters. If your car still has the factory intake, they will not fit. They are replacement parts for the Dinan intake system only.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReplacing both filters takes about 15 minutes with basic hand tools. Keep the factory screws, since they are reused. Install both filters at the same time.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eRemove the Dinan carbon fiber lid and set the fasteners aside.\u003c\/li\u003e\n  \u003cli\u003eRemove the center airbox screw and the filter support bracket, then lift out the old filters.\u003c\/li\u003e\n  \u003cli\u003eInstall the new filters into the oval openings with the rubber blocks pointing down.\u003c\/li\u003e\n  \u003cli\u003eRefit the support bracket and center screw.\u003c\/li\u003e\n  \u003cli\u003eReinstall the carbon lid with the factory hardware, checking that the foam seal sits flush.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Pair","offer_id":51766329508086,"sku":"D401-0023-0024-PAIR","price":311.9,"currency_code":"USD","in_stock":true},{"title":"Left","offer_id":51766329475318,"sku":"D401-0024","price":155.95,"currency_code":"USD","in_stock":true},{"title":"Right","offer_id":42605043319030,"sku":"D401-0023","price":155.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/F85-DIN-Fil-2_1024x1024_ce8a6b87-c39c-420b-abfb-6841c5070214.jpg?v=1722500249","url":"https:\/\/autotecknic.com\/products\/dinan-carbon-intake-replacement-air-filter-bmw-f85-x5m-f86-x6m","provider":"AutoTecknic USA","version":"1.0","type":"link"}