{"product_id":"dinan-carbon-fiber-cold-air-intake-bmw-f95-x5m-f96-x6m-xm-m60i","title":"Dinan Carbon Fiber Cold Air Intake - BMW F95 X5 M \/ F96 X6 M \/ G09 XM \/ X5 X6 X7 M60i (2020-2026)","description":"\u003cp\u003eA twin-turbo V8 in a two-ton SUV moves a lot of air. The factory airboxes on the X5 M and X6 M do the job, but they are sized for the stock tune and they pull from a hot engine bay. Give the turbos more cool air and they stop working so hard to make the same boost.\u003c\/p\u003e\n\u003cp\u003eThe Dinan Carbon Fiber Cold Air Intake fits the BMW F95 X5 M, F96 X6 M, G09 XM and the X5, X6 and X7 M60i. It adds a secondary air inlet at the front of the engine bay, enlarges both airboxes by 56%, and fits higher-capacity filters. On Dinan's flow bench it moves 630 CFM per bank against 575 CFM stock at 30 in. H2O, a Dinan-tested 10% gain.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow the Dinan Carbon Fiber Cold Air Intake Feeds the V8\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDinan developed the secondary inlet with continuous CFD analysis, and its cross-section is 86% larger than the factory opening. Carbon runners guide that extra air into each airbox so the flow stays smooth and even on both banks. Each side gets 82 sq in of filter area against 51 sq in stock, a 46% increase. Dinan notes the factory intake supports up to Stage 1 power levels. This system lowers the load on the turbos and leaves more headroom if you plan to go further.\u003c\/p\u003e\n\u003cp\u003eEvery visible piece is 100% genuine carbon fiber, not a wrap or hydro-dipped plastic. Open the hood and it looks like it belongs on a car at this price.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDinan Cold Air Intake Install and Legal Status\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt bolts in with no cutting or drilling and takes about two hours. No tune is required. Before you order, know this: the intake is legal under EPA's Tampering Policy dated November 23, 2020, but it is not legal for sale or use in the State of California. CARB testing is pending and no Executive Order number has been issued. Dinan part number D760-0056. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon fiber secondary air inlet and runners\u003c\/li\u003e\n  \u003cli\u003eTwo enlarged carbon fiber airboxes\u003c\/li\u003e\n  \u003cli\u003eTwo high-capacity air filters\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDinan-tested 10% more airflow: 630 CFM vs 575 CFM stock per bank at 30 in. H2O\u003c\/li\u003e\n  \u003cli\u003eSecondary inlet with 86% more cross-sectional area than stock\u003c\/li\u003e\n  \u003cli\u003eAirboxes 56% larger than stock\u003c\/li\u003e\n  \u003cli\u003e46% more filter area: 82 sq in vs 51 sq in per side\u003c\/li\u003e\n  \u003cli\u003eDeveloped with continuous CFD analysis\u003c\/li\u003e\n  \u003cli\u003eReal carbon fiber construction, not a wrap or overlay\u003c\/li\u003e\n  \u003cli\u003eBolt-on install, about 2 hours, no tune required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits the following BMW M and M Performance models:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW X5 M \/ F95 (2020-2026): X5 M, X5 M Competition\u003c\/li\u003e\n  \u003cli\u003eBMW X6 M \/ F96 (2020-2026): X6 M, X6 M Competition\u003c\/li\u003e\n  \u003cli\u003eBMW XM \/ G09 (2023-2026): XM, XM Label\u003c\/li\u003e\n  \u003cli\u003eBMW X5 M60i \/ G05 (2024-2026): X5 M60i\u003c\/li\u003e\n  \u003cli\u003eBMW X6 M60i \/ G06 (2024-2026): X6 M60i\u003c\/li\u003e\n  \u003cli\u003eBMW X7 M60i \/ G07 (2023-2026): X7 M60i\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot listed by Dinan for the earlier X5 M50i, X6 M50i or X7 M50i.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlan on about two hours. A confident DIYer can do it with hand tools, and any shop that works on M cars will find it straightforward. Work on a cool engine and follow the Dinan instructions included with the kit.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLet the engine cool completely and remove the engine covers as directed in the instructions.\u003c\/li\u003e\n  \u003cli\u003eLoosen the clamps and remove both factory airboxes and filters.\u003c\/li\u003e\n  \u003cli\u003eInstall the Dinan airboxes and filters in the factory locations.\u003c\/li\u003e\n  \u003cli\u003eFit the secondary inlet and carbon runners, then secure every clamp with the supplied hardware.\u003c\/li\u003e\n  \u003cli\u003eReinstall the covers, start the engine and confirm there are no leaks or warning lights.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268705648886,"sku":"DNND760-0056","price":2203.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/6fee5441b97269eb697d05ccba604036L.jpg?v=1784135627","url":"https:\/\/autotecknic.com\/products\/dinan-carbon-fiber-cold-air-intake-bmw-f95-x5m-f96-x6m-xm-m60i","provider":"AutoTecknic USA","version":"1.0","type":"link"}