{"product_id":"dinan-bmw-m5-m8-f90-f9x-rear-suspension-link-kit","title":"Dinan Rear Suspension Link Kit - BMW F9X M5 \/ M8 2018-2025","description":"\u003cp\u003e\u003cbr\u003eThe rear suspension geometry on the M5 and M8 was engineered to serve a wide range of driving styles. Rubber bushings in the toe links and forward trailing links absorb minor road inputs and give the suspension a compliant, forgiving quality for daily driving. In hard use, that same compliance becomes the liability.\u003c\/p\u003e\n\u003cp\u003eUnder threshold braking and aggressive acceleration, those bushings flex. The rear wheels develop excessive toe change, and the rear end moves in ways you didn't input. On a platform with 600 hp going to all four wheels, imprecision at the rear is the wrong compromise. Dinan rebuilds both critical link locations to remove that variable.\u003c\/p\u003e\n\u003cp\u003eThe rear toe link rubber bushing is replaced with a Teflon-lined machined steel rod end, and the curved OEM forged alloy rod is swapped for a stouter billet aluminum arm. The result is a direct, load-bearing connection between hub and chassis with none of the deflection the rubber-bushed setup allows. The forward lower trailing links receive the same treatment: billet aluminum arms with precision ball joints replace the OEM rubber-bushed components, adding the same precision Dinan uses in their front monoball kit.\u003c\/p\u003e\n\u003cp\u003eRubber boots protect both rod ends from contamination, so the precision you install stays precise through street use. Nylon-lined bearings keep operation quiet. The geometry change is repeatable and functional. The car responds the same way every time you ask it to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear toe link: Teflon-lined machined steel rod ends replace rubber bushings for flex-free toe control\u003c\/li\u003e\n\u003cli\u003eRear toe link bar: billet aluminum arm replaces the curved OEM forged alloy rod for added structural rigidity\u003c\/li\u003e\n\u003cli\u003eForward trailing links: billet aluminum arms with precision ball joints replace rubber-bushed OEM components\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish on all aluminum components for corrosion resistance and clean aesthetics\u003c\/li\u003e\n\u003cli\u003eRubber boots on rod ends protect against environmental damage for long-term performance\u003c\/li\u003e\n\u003cli\u003eNylon-lined bearings for quiet operation on the street\u003c\/li\u003e\n\u003cli\u003eEliminates rear-end instability under hard braking and acceleration\u003c\/li\u003e\n\u003cli\u003eCompatible with Base and Competition M5\/M8 platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitment confirmed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M5 \/ F90 (2018-2022): Base, Competition\u003c\/li\u003e\n\u003cli\u003eBMW M5 \/ F90 (2022): CS\u003c\/li\u003e\n\u003cli\u003eBMW M8 \/ F91 F92 (2020-2025): Base, Competition\u003c\/li\u003e\n\u003cli\u003eBMW M8 Gran Coupe \/ F93 (2020-2025): Base, Competition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional installation recommended. This kit requires removal of the rear suspension links and rear subframe access. A full 4-wheel alignment is required after installation to restore correct suspension geometry.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRaise and support the vehicle safely; remove rear wheels for access\u003c\/li\u003e\n\u003cli\u003eRemove the factory rear toe links and forward lower trailing links\u003c\/li\u003e\n\u003cli\u003eInstall Dinan billet aluminum arms and rod ends per the included instructions\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to factory specification\u003c\/li\u003e\n\u003cli\u003ePerform a full 4-wheel alignment before driving\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51343802925302,"sku":"DNND280-0020","price":1299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/002c1319e4a9f64704474cfabfcace01L.jpg?v=1785192495","url":"https:\/\/autotecknic.com\/products\/dinan-bmw-m5-m8-f90-f9x-rear-suspension-link-kit","provider":"AutoTecknic USA","version":"1.0","type":"link"}