{"product_id":"dinan-5mm-wheel-spacers-bmw-g-chassis-5x112","title":"Dinan 5mm Black Wheel Spacers, Pair - BMW G-Chassis 5x112 \/ 66.5mm CB","description":"\u003cp\u003eLook at your BMW from the rear three-quarter and the wheels sit just a little too far inside the arches. It is a small gap, but once you see it, you cannot unsee it. Five millimeters per side is often all it takes to fill that space and give the car the planted, square stance it should have had from the factory.\u003c\/p\u003e\n\u003cp\u003eDinan 5mm Wheel Spacers are CNC-machined from 6061 aluminum and anodized black for BMW G-chassis cars with the 5x112 bolt pattern, 66.5mm center bore and M14x1.25 lug bolts. Each spacer moves the wheel out 5mm from the hub, widening the track for a more aggressive look and a slightly wider stance through corners.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy Dinan 5mm Wheel Spacers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheap spacers are where wheel fitment problems start. Dinan machines these from 6061 aluminum to a precise 5mm thickness with a 66.5mm center bore matched to the G-chassis hub, then anodizes them black so they disappear behind the spokes. The weight-saving design keeps unsprung mass down. They are sold as a pair, so order two sets to do all four corners.\u003c\/p\u003e\n\u003cp\u003eWill they rub? At 5mm, most owners use them to fine-tune fitment rather than push the limits, but clearance always depends on your wheel width, offset and tire size. Check your setup, and if you are unsure, ask us before you order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWheel Spacer Lug Bolts and Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExtended lug bolts are required and sold separately. Dinan specifies M14x1.25 cone seat lug bolts and suggests D220-0003 (33mm) for this spacer. Never reuse your stock lug bolts with a spacer. Fitment follows Dinan's G-chassis spacer guide, and exceptions do apply, so confirm your car before ordering. Dinan part number D210-2023. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 Dinan 5mm wheel spacers, black anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5mm thick, moves each wheel out 5mm from the hub\u003c\/li\u003e\n  \u003cli\u003e5x112 bolt pattern, 66.5mm center bore\u003c\/li\u003e\n  \u003cli\u003eCNC-machined 6061 aluminum\u003c\/li\u003e\n  \u003cli\u003eAnodized black finish\u003c\/li\u003e\n  \u003cli\u003eWeight-saving design\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n  \u003cli\u003eRequires extended M14x1.25 cone seat lug bolts, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits BMW vehicles that use Dinan's G-chassis spacer fitment:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW G-Chassis: 5x112 bolt pattern, 66.5mm center bore, M14x1.25 lug bolts\u003c\/li\u003e\n  \u003cli\u003eBMW F9x M5 \/ M8: uses the G-chassis spacer fitment\u003c\/li\u003e\n  \u003cli\u003eBMW F48 X1 \/ F39 X2: uses the G-chassis spacer fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExceptions do apply. Confirm your vehicle's bolt pattern, center bore and lug bolt thread before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA quick job with a jack, stands and a torque wrench. Always use the correct extended lug bolts, never the stock bolts.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLoosen the lug bolts, raise the car and support it safely on jack stands.\u003c\/li\u003e\n  \u003cli\u003eRemove the wheel and clean any rust or debris from the hub face.\u003c\/li\u003e\n  \u003cli\u003eFit the spacer flat against the hub, centered on the 66.5mm hub bore.\u003c\/li\u003e\n  \u003cli\u003eMount the wheel with the extended M14x1.25 cone seat lug bolts and snug them in a star pattern.\u003c\/li\u003e\n  \u003cli\u003eLower the car, torque the bolts to BMW specification and re-check torque after the first 50 to 100 miles.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268688969974,"sku":"DNND210-2023","price":52.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/ec52146c87ba16f429ac687410a31f91L.jpg?v=1784135445","url":"https:\/\/autotecknic.com\/products\/dinan-5mm-wheel-spacers-bmw-g-chassis-5x112","provider":"AutoTecknic USA","version":"1.0","type":"link"}