{"product_id":"dinan-10mm-wheel-spacers-5x120-72-6mm-bmw-e-f-chassis","title":"Dinan 10mm Wheel Spacers Pair 5x120 72.6mm - BMW E \/ F-Chassis","description":"\u003cp\u003eE46, E90, F30, F80. Different decades, same problem: wheels that sit a little too far inside the arches from the factory. Ten millimeters per side is the subtle fix. It pulls the wheel out toward the fender line without changing wheels, tires or ride height.\u003c\/p\u003e\n\u003cp\u003eDinan 10mm wheel spacers (part number D210-2039) are machined for the BMW 5x120 bolt pattern and 72.6mm center bore used on E-chassis and F-chassis cars. Each spacer moves the wheel 10mm further from the hub for a fuller stance and extra clearance around brake calipers. You get a pair, enough for one axle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy Dinan 10mm Wheel Spacers for 5x120 BMWs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese are CNC-machined from billet 6061 aluminum and anodized black, with a 72.6mm bore cut to the BMW 5x120 hub diameter so the spacer seats on the hub itself instead of floating on the bolts.\u003c\/p\u003e\n\u003cp\u003eBolts are where people get caught out. Every spacer, even a 10mm, needs longer lug bolts, and the thread depends on your chassis. E-chassis cars use M12x1.5 bolts. F-chassis cars use M14x1.25. Dinan's matches for this spacer are its 39mm M12x1.5 cone seat bolts for E-chassis and its 40mm M14x1.25 cone seat bolts for F-chassis, both sold separately. Get the right set and the install is simple.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x Dinan 10mm wheel spacers, 5x120, 72.6mm center bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLug bolts are not included. Order the Dinan 39mm M12x1.5 (E-chassis) or 40mm M14x1.25 (F-chassis) cone seat bolt set separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10mm thickness moves each wheel 10mm outboard\u003c\/li\u003e\n  \u003cli\u003e5x120 bolt pattern with 72.6mm center bore\u003c\/li\u003e\n  \u003cli\u003eCNC-machined billet 6061 aluminum\u003c\/li\u003e\n  \u003cli\u003eWeight-saving design\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish\u003c\/li\u003e\n  \u003cli\u003eSold as a pair (one axle)\u003c\/li\u003e\n  \u003cli\u003eWorks with Dinan 39mm M12x1.5 or 40mm M14x1.25 cone seat lug bolts, depending on chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDinan specifies this spacer by chassis family, not by individual model:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW E-Chassis: 5x120 bolt pattern, M12x1.5 lug bolts\u003c\/li\u003e\n  \u003cli\u003eBMW F-Chassis: 5x120 bolt pattern, M14x1.25 lug bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDinan-listed exceptions: the F90 M5, F91 \/ F92 \/ F93 M8, F48 X1 and F39 X2 use G-chassis 5x112 fitment and do not take this spacer. This spacer has a 72.6mm center bore. Some large BMWs use a bigger 74.1mm hub bore, including the E39 5 Series, E38 7 Series and the X5 \/ X6 (E53, E70, E71, F15, F16). Confirm your hub bore before ordering, or contact us and we will check it for you.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA bolt-on job with a jack, jack stands and a torque wrench. Match the bolt thread to your chassis (M12x1.5 for E-chassis, M14x1.25 for F-chassis) and confirm your wheels use a cone seat before ordering bolts.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLoosen the wheel bolts, raise the car and support it on jack stands.\u003c\/li\u003e\n  \u003cli\u003eRemove the wheel and clean any rust or debris from the hub face.\u003c\/li\u003e\n  \u003cli\u003eSlide the spacer over the hub pilot so it sits flush against the hub face.\u003c\/li\u003e\n  \u003cli\u003eMount the wheel and thread in the longer lug bolts by hand.\u003c\/li\u003e\n  \u003cli\u003eSnug the bolts in a star pattern, lower the car and torque to your BMW's factory wheel bolt specification.\u003c\/li\u003e\n  \u003cli\u003eRecheck torque after the first short drive.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268689953014,"sku":"DNND210-2039","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/aaed565a529e7a7a1d4bb869cd3c6103L.jpg?v=1784135457","url":"https:\/\/autotecknic.com\/products\/dinan-10mm-wheel-spacers-5x120-72-6mm-bmw-e-f-chassis","provider":"AutoTecknic USA","version":"1.0","type":"link"}