{"product_id":"dinan-10mm-wheel-spacers-5x112-66-5mm-bmw-g-chassis","title":"Dinan 10mm Wheel Spacers Pair 5x112 66.5mm - BMW G-Chassis \/ F9x M5 \/ M8 \/ F48 X1 \/ F39 X2","description":"\u003cp\u003eYour wheels look great until you see them from the rear three-quarter and notice the gap between the tire sidewall and the fender lip. Ten millimeters per side pulls the wheel out toward the fender without buying new wheels or changing tire sizes.\u003c\/p\u003e\n\u003cp\u003eDinan 10mm wheel spacers (part number D210-2027) are machined for the BMW 5x112 bolt pattern and 66.5mm center bore used across the G-chassis lineup. They push each wheel 10mm further from the hub, widening your track for a fuller stance and extra room around big brake calipers. You get a pair, enough for one axle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy Dinan 10mm Wheel Spacers Are Worth It\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA spacer that does not center properly on the hub shows up as vibration at highway speed. These are CNC-machined from billet 6061 aluminum and anodized black, with a 66.5mm bore cut to BMW's G-chassis hub diameter so the spacer seats on the hub itself instead of floating on the studs.\u003c\/p\u003e\n\u003cp\u003eThe bigger question with any spacer is bolts. Your factory wheel bolts are sized for wheel-to-hub contact only, so adding 10mm means you need bolts 10mm longer to keep full thread engagement. Dinan calls out its 40mm M14x1.25 cone seat lug bolts for this spacer, which takes the guesswork out of it. Order those alongside and you are ready to bolt up.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x Dinan 10mm wheel spacers, 5x112, 66.5mm center bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLug bolts are not included. Dinan's matching bolt for this spacer is the M14x1.25 cone seat 40mm set (sold separately).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10mm thickness moves each wheel 10mm outboard\u003c\/li\u003e\n  \u003cli\u003e5x112 bolt pattern with 66.5mm center bore for BMW G-chassis hubs\u003c\/li\u003e\n  \u003cli\u003eCNC-machined billet 6061 aluminum\u003c\/li\u003e\n  \u003cli\u003eWeight-saving design\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish\u003c\/li\u003e\n  \u003cli\u003eSold as a pair (one axle)\u003c\/li\u003e\n  \u003cli\u003eDesigned to pair with Dinan 40mm M14x1.25 cone seat lug bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDinan's application guide specifies this 5x112, 66.5mm center bore spacer (used with M14x1.25 bolts) for:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW G-Chassis (5x112 \/ M14x1.25)\u003c\/li\u003e\n  \u003cli\u003eBMW F9x M5 \/ M8 and F48 X1 \/ F39 X2 (exceptions that use the G-chassis fitment of 5x112 with M14x1.25 bolts)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot for E-chassis BMWs (5x120 \/ M12x1.5) or other F-chassis BMWs (5x120 \/ M14x1.25). Contact us before ordering if your car is not covered above.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA straightforward bolt-on job with a jack, jack stands and a torque wrench. The critical step is using longer bolts: Dinan matches its 40mm M14x1.25 cone seat bolts to 10mm and 12mm spacers. Confirm your wheels use a cone seat before ordering bolts, and check tire-to-fender clearance at full steering lock, especially on staggered or aggressive-offset setups.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLoosen the wheel bolts, raise the car and support it on jack stands.\u003c\/li\u003e\n  \u003cli\u003eRemove the wheel and clean any rust or debris from the hub face.\u003c\/li\u003e\n  \u003cli\u003eSlide the spacer over the hub pilot so it sits flush against the hub face.\u003c\/li\u003e\n  \u003cli\u003eMount the wheel and thread in the 40mm lug bolts by hand.\u003c\/li\u003e\n  \u003cli\u003eSnug the bolts in a star pattern, lower the car and torque to your BMW's factory wheel bolt specification.\u003c\/li\u003e\n  \u003cli\u003eRecheck torque after the first short drive.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268689232118,"sku":"DNND210-2027","price":76.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/f4e02804a6774f4d3420cdffe53c3f73L.jpg?v=1784135449","url":"https:\/\/autotecknic.com\/products\/dinan-10mm-wheel-spacers-5x112-66-5mm-bmw-g-chassis","provider":"AutoTecknic USA","version":"1.0","type":"link"}