{"product_id":"autotecknic-dry-carbon-replacement-door-panels-honda-s2000","title":"AutoTecknic Dry Carbon Fiber Replacement Door Panels - Honda S2000 AP1\/AP2 (2000-2009)","description":"\u003cp\u003eYou didn't buy an S2000 to keep it stock. Every mod you've made has been deliberate. Your door panels deserve the same treatment. These dry carbon fiber replacement door panels from AutoTecknic are engineered from scratch to replace your factory plastic panels entirely. Not a clip-on overlay. Not a hydrodipped shell. Real pre-preg dry carbon fiber, precision 3D scanned from an S2000 chassis, built to fit exactly like OEM.\u003c\/p\u003e\n\n\u003cp\u003ePre-preg construction keeps weight down and fiber density up. The result is a 3K 2x2 twill weave carbon surface with a satin finish that lets the weave do the talking. No heavy gloss coat, no filler. The kind of finish that looks right in a stripped-out cockpit and holds up under real use. Every mounting point, every cutout, every clip location mirrors the factory geometry. Installation is a straight swap with no cutting or modification required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy Dry Carbon\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard wet carbon parts use excess resin to form the panel, which adds weight and requires additional finishing to look presentable. Pre-preg dry carbon is cured under heat and pressure with only the resin already embedded in the fiber. No excess, no bloat. The result is a lighter, stiffer panel compared to factory plastic or wet-layup carbon alternatives. For a car where every gram counts, that distinction matters.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% genuine pre-preg dry carbon fiber construction\u003c\/li\u003e\n  \u003cli\u003eReal 3K 2x2 twill weave, not vinyl wrap or hydrodip\u003c\/li\u003e\n  \u003cli\u003eSatin finish — refined without being overdone\u003c\/li\u003e\n  \u003cli\u003eFull replacement panels, not overlays\u003c\/li\u003e\n  \u003cli\u003e3D-scanned from OEM Honda S2000 door panel for precision geometry\u003c\/li\u003e\n  \u003cli\u003eAll OEM cutouts and mounting points retained\u003c\/li\u003e\n  \u003cli\u003eSold as a pair (driver and passenger)\u003c\/li\u003e\n  \u003cli\u003eSignificant weight reduction over factory plastic panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits all US-market Honda S2000 model years, both AP1 and AP2 generations:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHonda S2000 AP1 (2000-2003): All trims\u003c\/li\u003e\n  \u003cli\u003eHonda S2000 AP2 (2004-2009): All trims, including CR (2008-2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese panels are direct replacements for the factory door panels. Plan for 1-2 hours per door. If your car has power windows, you will need to transfer your factory window switches, vapor barrier, and any speaker grilles from your OEM panels to the carbon replacements before fitting.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eRemove factory door panel using a trim panel removal tool to release OEM clips\u003c\/li\u003e\n  \u003cli\u003eDisconnect any electrical connectors (window switches, speaker connectors)\u003c\/li\u003e\n  \u003cli\u003eTransfer OEM mounting hardware, clips, and electrical components to the carbon panels\u003c\/li\u003e\n  \u003cli\u003eReinstall vapor barrier onto the carbon panel prior to fitting\u003c\/li\u003e\n  \u003cli\u003eAlign panel to door and press firmly to seat all clips\u003c\/li\u003e\n  \u003cli\u003eReconnect electrical connectors and verify window switch operation before closing door\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNo cutting, trimming, or drilling required. Panels are designed to use all existing OEM mounting locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS2000 CR owners (2008-2009):\u003c\/strong\u003e The CR was built without power windows. No window switch transfer is required. Standard vapor barrier reinstallation applies.\u003c\/p\u003e","brand":"AutoTecknic USA","offers":[{"title":"S2000 AP1 \/ 3K Twill Weave (2X2) - Pre-preg\/ Satin Finish \/ Left Hand Drive (LHD)","offer_id":51465462317302,"sku":"ATK-HO-0009-AP1-LHD","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"S2000 AP2 \/ 3K Twill Weave (2X2) - Pre-preg\/ Satin Finish \/ Left Hand Drive (LHD)","offer_id":51465462382838,"sku":"ATK-HO-0009-AP2-LHD","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/AU0I6015.jpg?v=1786653632","url":"https:\/\/autotecknic.com\/products\/autotecknic-dry-carbon-replacement-door-panels-honda-s2000","provider":"AutoTecknic USA","version":"1.0","type":"link"}