The 991 Turbo Eventuri intake system was developed through extensive real-world testing with the aim of allowing the turbos to work more efficiently. By replacing the single stock airbox with individual patented Venturi filter housings, the turbos are able to spool and generate boost with less drag. As a result, the wastegate duty cycles are reduced resulting in peak boost at lower RPM, and therefore performance is increased. The two individual filters provide a larger filtration area as compared to the single stock panel filter. Furthermore, in order to keep inlet air temperatures down, the Venturi housings are sealed against an air duct that draws ambient air from the same location as the stock system. Since the 911 Turbo engine bay is densely packed, high IATs can only be avoided by ensuring a fully sealed intake system. The combination of a smoother airflow path to each turbo with low IATs results in higher performance and sharper throttle response over the stock airbox.

The intake duct seals against the underside of the boot-lid using the stock rubber cushion and then extends down to seal against the filter housings. Crafted from 100% prepreg carbon fiber the intake duct ensures that the intake pulls in ambient air only and not heated engine bay air. Again in order to maximize flow efficiency, the transition from the circular openings for the filter housings to the single air entry point is as smooth as possible. The duct also features 2 drain tubes that direct water away from the filters. The tubes are designed such that the intakes will draw a minimum amount of air from within the engine bay due to the larger flow resistance in the tubes as compared to the opening at the top of the duct. The complex geometry of the duct was necessary to clear the various components in the engine bay of the 991 Turbo. 

The brackets are laser cut from stainless steel and powder coated. We went to great lengths to ensure that the intakes have a precision fitment using the stock airbox mounting locations. The brackets not only brace the intakes to the chassis but also allow engine components to be secured as they are with the stock airbox. In order to save weight, each bracket has purposely shaped cutouts that remove material yet allow the overall structure to remain rigid. 

The complete system comes together to provide an audible and noticeable performance improvement over the stock airbox system. 

The Eventuri 991 Turbo intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them: 

Fitment: Porsche 991.1 991.2 Turbo, Turbo S

*Compatible with the IPD Y-Pipe

Each intake system consists of: 

  • 2 x Carbon Fiber Venturi Housings with Integrated Tubes
  • 2 x Bespoke High Flow Generation 2 Filters
  • 2 x Aluminium Inlet Cowls
  • Carbon Fiber inlet duct
  • Laser Cut Stainless Steel bracket work

Acceleration Time: 60-130mph Reduced By 0.2 seconds

** This item is not eligible for return **